Fisher & Paykel AquaSmart WL70T60D Installation Instructions Manual page 6

Installation instructions
4
Levelling your machine
It is IMPORTANT to level the machine to ensure good spin
performance and effective detergent and fabric softener
dispensing.
Separate the 4 rubber foot inserts from the moulding and
1
fit into the feet on the base of the machine.
Move the machine to its final position. (We suggest a
2
minimum clearance of 0 mm each side).
Adjust the feet so the machine is level and cannot rock.
3
Turn on the water and check all hose connections for
4
leaks. Make sure there are no kinks in the hoses.
Uncoil power cord and plug into wall socket.
5
Correct
Incorrect
To check levelling look
down on the wash bowl
Clothes washer safety
This clothes washer is not intended for use by young children or infirm persons without
supervision.
Your AquaSmart™ can only be opened during the initial fill stage. Once the fill is complete, the lid
will be locked for safety reasons. Please supervise young children to ensure they do not play with
this clothes washer.
Important!
If you are using an extension cord or a portable electrical outlet device (eg. multi-socket outlet
box), ensure that it is positioned so that it does not come into contact with water or moisture.
Accessories and spare parts
Available from your Fisher & Paykel Dealer or Authorised Service Centre.
Inlet Valve Cap - Part No. 388491,
Hose Inlet Large Bore - Part No. 426123,
Power Cord - If the Power Cord of your clothes washer is damaged it must be replaced by a
Fisher & Paykel Authorised Service Centre, as it is not a standard power cord.
Wind left foot down
(out) to correct
Wind right foot down
(out) to correct
Fig.4 Adjusting levelling feet
Lid
Topdeck
Lid
Topdeck Lid
Topdeck
Hose Inlet Long ( m) - Part No. 422680
Drain Hose Extension - Part No. 425627p
Adjustable feet
Rubber insert
Fig.5 To assess levelling
check lid alignment