Wash Cycle Options Explained - Fisher & Paykel AquaSmart WL70T60D Installation Instructions Manual

Changing the wash cycle options
6

Wash cycle options explained

Temperature
AquaSmart™ offers five wash temperatures.
Cold Warm/Cold Warm Warm/Hot Hot
Incoming water
5°C 40°C 50°C 60°C
from tap
Simply increase or decrease your wash temperature by pressing the
TEMPERATURE button to scroll through the options available.
Note: The temperature option selects the temperature of the first phase of the
two-part wash system, the Detergent Activating Wash.
Controlled Cold
The temperature of cold water varies widely, depending on your location
and the season. The lower the water temperature, the less effective the wash
becomes. To help with this issue we have developed Controlled Cold which adds
a small amount of warm water, when necessary, to raise your cold water wash to
0°C. To access this secondary option please refer to page .
Spin Speed
Your AquaSmart™ washer offers three spin speeds: Fast (000rpm), Medium
(700rpm) and Slow (00rpm), plus an additional Spin Hold option.
Simply increase or decrease your spin speed by pressing the SPIN button to
scroll through the options available. When Spin Hold is selected the washer will
drain at the end of the rinse but stop the cycle before the spin. This option is
ideal for items that require drip drying.
Fabric Softener
If you wish to use fabric softener in your AquaSmart™ clothes washer, please
select the SOFTENER option. Press the SOFTENER button to turn this option
to ON. This will adjust the rinse to ensure that the fabric softener is dispensed
correctly.