Table of Contents
Advertisement
Caring for your AquaSmart™ washer
6
Cleaning your low profile agitator
If your low profile agitator becomes stained we recommend you use household bleach to clean
it. Ensure you wear gloves, tip a small amount of household bleach onto a soft cloth and apply
to the stain. Be careful to avoid metal surfaces of your machine. Leave it to soak in for 0 minutes
and repeat. Then put your AquaSmart™ washer through an AUTO CLEAN cycle to remove any
residual bleach (refer to page 5).
Automatic lint disposal system
With AquaSmart™ there is no need to remove messy lint filters. Your AquaSmart™ has a self
cleaning lint disposal system. It automatically separates the lint from the wash water as it
washes. The lint becomes trapped between the inner and outer bowls and is flushed out at the
end of the wash.
Nappy sanitisers/bleach
Nappy sanitisers and bleach are very corrosive to metal surfaces. DO NOT use your AquaSmart™
to soak items in bleach or sanitiser, or tip the contents of the nappy bucket into your machine.
Rinse and wring items out thoroughly before placing them in the machine. For cloth nappies,
wring out, place into the washer and select BULKY cycle. Using the ADVANCE button, advance
the cycle to RINSE and press START. After the cycle is complete, wash nappies as normal.
Hide quick links:
Advertisement
Table of Contents
