Fabric Softener - Fisher & Paykel AquaSmart WL70T60D Installation Instructions Manual

Fabric softener


Choosing the right cycle
If you wish to use fabric softener you will need to select the SOFTENER option which will give
you a deep rinse. If SOFTENER is not selected, the fabric softener will not be dispensed.
Adding the fabric softener
Measure softener out into the cap and pour into the fabric softener
dispenser. The softener will remain in the top of the dispenser until
the deep rinse, where water flushes it into the bowl.
Note: If you fill beyond the MAX mark, the overflow will pour fabric
softener into the bowl prematurely and contribute to Scrud
(refer below).
Cleaning the dispenser
The funnel of the fabric softener dispenser (the top) clicks off easily. Simply place a finger down
the centre and lift. The remaining siphon tube and fabric softener well is not removable and
needs to be wiped clean with hot water and an old toothbrush periodically. If the siphon tube
looks partially blocked use a cotton bud to clean.
Scrud
Scrud is the name of the waxy build-up that can occur within any washer when fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on the clothes or an
unpleasant smell in your washer.
If you wish to use fabric softener we recommend:
Use it sparingly.
Measure it carefully to ensure you do not fill above the MAX level.
Clean the dispenser as soon as the cycle has finished.
Clean your machine regularly using the AUTO CLEAN cycle (see page 5).
Cold water washing increases the chance of this build-up occurring. We recommend a warm or
hot wash at regular intervals, eg. every 5
Fig.12 Removing the fabric softener funnel
wash.
th
Fig.11 Adding softener into
the fabric softener dispenser