Wash Temperatures/Controlled Cold - Fisher & Paykel AquaSmart WL70T60D Installation Instructions Manual

Wash temperatures
All wash temperatures can be individually adjusted.
Enter Option Adjustment mode (refer to page 0).
1
Select the WASH TEMPERATURE you want to adjust.
2
The wash cycle buttons show the temperature adjustment possible for that temperature.
3
For example the Regular cycle button will be the coldest available setting for that temperature
and the Easy Iron button will be the warmest.
This means that by selecting a button to the left or the right of the button that is currently lit you
can increase or decrease the temperature. To increase the temperature setting, move to the right
and to decrease the temperature setting, move to the left. Each step in temperature equates to
approximately °C.
Controlled Cold
The temperature of cold water varies widely, depending on your location and the season. The
lower the water temperature, the less effective the wash becomes. To help with this issue we
have developed Controlled Cold. This adds a small amount of warm water, when necessary, to
raise your cold water wash to 0°C. This will ensure that you receive the most effective wash in
cold water.
Enter Option Adjustment mode (refer to page 0).
1
Select COLD wash temperature.
2
The Wash cycle buttons show the temperature adjustment possible.
3
When the REGULAR cycle light is on, the machine will fill with cold water only.
4
Press the SHEETS cycle button and your AquaSmart™ will control the temperature to
5
approximately 0˚C. Each following light to the right equals approximately a ˚C temperature rise.
Note: If you always use cold or controlled cold water, we recommend that a warm or hot wash be
used regularly, eg. every 5th wash should be at least a warm one.
Fig.15 Adjusting Wash Temperatures
Fig.16 Select Cold Wash temperature
Changing pre-set options