Multi-Exposure - Pentax K-7 Operating Manual

Press the shutter release button fully.
When [Start Interval] is set to [Now], the first picture is taken. When set
to [Set Time], shooting starts at the set time.
For shooting multiple pictures, pictures are taken at the interval set in Step 2.
After the set number of pictures is taken, the camera returns to normal
Capture mode.
• The camera cannot be operated during interval shooting. To cancel the interval
shooting, press any button on the back of the camera or press the shutter
release button and the MENU button to display the exit confirmation screen.
and then use the four-way controller (A v) to select [Exit] and press the OK
button. You can also exit the interval shooting by turning the main switch off or
turning the mode dial.
• When the interval shooting is set, Extended Bracketing and Multi-exposure are
not available.
• Interval shooting is not available when the exposure mode is set to B (Bulb)
mode.
• [] (Single Frame Shooting) is selected regardless of the current drive mode
setting.
• If the subject is not in focus with the focus mode set to AES (Single mode) or
if the [Interval] setting is too short and the previous image processing cannot be
completed before taking the next picture, no picture may be taken.
• Although each shot taken is displayed on the monitor with Instant Review. they
cannot be enlarged or deleted.
• The [Interval] setting is disabled when [Number of Shots] is set to [1].
• Interval shooting is canceled when the SD Memory Card has no more available
space.
• IfAuto Power Off function (p.270) turns the camera offduring interval shooting,
the camera automatically turns on again when the shooting time approaches.
• It is recommended to use the AC adapter kit K-AC50 (optional) when using the
interval shooting over a long period of time. (p.47)
Multi-exposure
You can take multiple frames while creating a single picture.
1
Multi-exp0sure is not available When the mode dial is set to m (Green)or p1_
(Movie), or when Extended Bracketing, HDR Capture or Digital Filter is set.
Select [Multi-exposure] in the [1_1 Rec. Mode 2] menu and
press the four-way controller ( • ).
The [Multi-exposure] screen appears.
,2 Usethefour-waycontroller(A V ) to select [Number of Shots].