Pentax K-7 Operating Manual page 6

8
Press the
OK
button.
The adjustment value is saved.
Press the
MENU
button.
The camera returns to the Capture mode.
Take a test picture.
You can easily check the focusing position by enlarging the image during
Live View (p.156) or Digital Preview (p.131).
' Even When an adjustment Value has been saved using [Apply one], if You
press the OK button with [Apply AI!] selected in Step 3, the [Apply All] value
is used !nstead of the [Apply One] value.
, To reset a saved adjustment value, select [Reset] inStep 3.
Choose the part of the viewfinder to set focus to. The factory default
setting is AuTo _ (Auto).
The selected AF point lights red in the viewfinder (Superimpose AF Area).
F:q Center Sets the focusing area to the center of the viewfinder.
SEL Select Sets the focusing area to one of the eleven points in the AF area.
The camera selects the optimum AF point even if the subject is
Auto
AUTO
not centered.
Set with the AF point switching dial.
, AF point is not displaYed in the viewfinder When [Oft] is selected for [i5.
Superimpose AE Area] in the [C Custom Setting 3] menu (p.86).
, The AF point is fixed to I-:q regardless 0f this setting when using lenses other
than DAI DA LI D FAI FA J, FA or F lens. (p.292)