Pentax K-7 Operating Manual page 18

4
Aim the camera at the subject and press the shutter
release button halfway.
The following indicators appear on the status screen.
((,llll_: Shake Reduction On + Horizon Correction On
({_: Shake Reduction Off + Horizon Correction On
• Set [Shake Reduction] to (C,1l_(Off) when using the camera with a tripod or
when this function is not needed.
• [Shake Reduction] is automatically set to _-_LtJ)3 (Off) and cannot be selected
in the following situations.
- Self-timer shooting
Remote control shooting
- Bulb shooting
- HDR Capture
- Mirror lock-up shooting
- Wireless mode with an external flash
, The Shake Reduct on function Will not fully Work (for about 2 seconds) right
after turning on the camera or restoring from Auto Power Off. Wait for the
Shake Reduction function to become stable before gently pressing the sh utter
release button to take a picture. When you press the shutter release button
halfway and if ((4111)) appears in the viewfinder, the camera is ready to take a
picturel
• The Shake Reduction function is available with any 1_"-7 compatible
PENTAX !ens. However; when the aperture ring is set to other than the A
(Auto) position or a lens without an A position is used, the Camera does not
operate unless [37: Using Aperture Ring] inthe [C Custom Setting 6] menu
is set to [Permitted]. Set this beforehan& However, in such cases some
functions are restricted. Refer to !!Notes on [37. Using Apertu re Ring]" (p.294)
for details.