Using in Wireless
Mode
By using two external flashes (AF540FGZ or AF360FGZ) or using the
built-in flash with an external flash, you can shoot in P-TTL flash mode
without connecting the flash units with a cord.
' Set the p0wei switch of the external
flash t0 W!RELESS
' Two or more AF540EGZ/AF360FGZ
external
flashes
are required
to Use
High-speed
flash sync in the wireless
mode. This function
cannot be used in
combination
with the built-in flash:
, Set the wireless
mode of the external flash not directly connected
to the
camera to SLAVE.
First set the channel for the external flash unit on the camera.
1
Set the channel
for the external
flash unit.
,2
Remove
the cover of the hot shoe and attach the external
flash.
3
Turn on the camera
and the external
flash, and press the
shutter
release
button halfway.
The built-in flash is set to the same channel as the external flash unit.
, When set to w_ model the channe! current!y set fo[the
built-in flash is
displayed
in the viewfinder
for 10 seconds.
• Be sure to set all the flashes to the same channel.
Refer to the manual of
AF540FGZ
or AF360FGZ
for details on how to set the channel
on the
external
flashi