Table of Contents
Advertisement
SHde thetwoUpright C overs (75)ontotheendsofthe
PuUse Bar(69),AHgn thehoUes in theUower endsofthe
PuUse BarwiththehoUes intheUpright B ase(85),
Cutthetie securing thePuUse Wire(74)to theUpright
Base(85),Connect thePuUse WiretothePuUse BarWire
(79),TheconnectorsshouJd slide togethereasiJy and
snapinto place.If they do not,turn oneconnector
andtry again.Insertthewires downintotherightsideof
theUpright B ase(65),
HoUd t hePuUse Bar(69)against t heUpright B ase(85),Do
notdropthePuUse BarintotheUpright B ase, A ttach the
PuUse Barto theUpright B asewiththefourPuUse Bar
BoUts (66)andfourStarWashers (67),Becarefulnot to
pinch thewires.Startall four PulseBar Boltsbefore
tighteningthem.
SHde the Upright Covers (75)overthePuUse BarBoUts
(66),
Press thetwoUpright C overs (75)ontotheUpright B ase
(85),Attach eachUpright Coverwitha 3/4"Screw (7),
66
79 74
66
--75
_7
.-- 85
--75
Cut the tie securing the Wires to the Upright Base (85),
Have a second person hold the console assembly near the
Upright Base (85), Connect the Upright Wire Harness (73)
and the Pulse Wire (74) to the wires extending from the
console assembly, The connectors
shouJd shale together
easiJy and snap into pJace. If they do not, turn one con-
nector and try again. Insert the connectors into the
Console Assembly,
Connect the Upright Ground Wire (113) to the ground wire
extending from the console assembly, Make sure that the
wires are full inserted into each other, Insert the ground
wires into the Console Assembly,
7
Console
Assembl'
Ground
W i re
73
Hide quick links:
Advertisement
Table of Contents
