MTD 19A70020OEM Operator's Manual page 9

Mount Assembly onTractor
Install mounting assembly on tractor as follows:
1. Slide the mounting bracket assembly along the frame rails
of the tractor until the hooks in the mounting brackets
align under the shoulder bolts on your tractor, as seen in
3.
Install the bagger hanger assembly onto the mounting
assembly on the tractor by hooking it over the hitch plate
between the two tabs. See Fig. 4-6.
2.
Figure 4-4
Fig. 4-4.
Secure the mounting bracket assembly to the tractor using
two 711-0332 clevis pins and 714-04023 cotter pins from
/ ....... \
'\
Figure 4-5
hardware pack 689-00095. See Fig. 4-5.
/
4.
Figure 4-6
Secure the hanger assembly to the mounting assembly
using a 5/16" bolt and flange nut packed in with this
upright bagger support. See Fig. 4-7.
Figure 4-7
SECTION 4 --
ASSEMBLY& INSTALLATION
9