MTD 19A70020OEM Operator's Manual page 13

15. Install the chute tube extension onto the chute elbow
by lining up the tabs and sliding the adapter over the
chute elbow, as in Fig. 4-22. Secure the chute adapter by
stretching the chute strap and hooking it onto the grass-
catcher pin previously installed.
Figure 4=20
Figure 4=21
Figure 4=22
16. Peelthe backingoff of the self-adhesive foam strip (721-
04388)that hasbeen includedwith yourgrass collector.Apply
it to the upper chute,flush againsttheflangeas shownin Fig.
23.
Figure 4=23
SECTION 4 --
ASSEMBLY &
_NSTALLATION
13