Magnavox ZV457MG9A Owner's Manual page 30

If you have changed antenna connection, we recommend that you program available channels in your area with the
following procedures.
Press [SETUP] and use [A /T] to
select "General Setting", then press
[OK]•
"General Setting" menu will appear.
2
3
4
Use [A / V] to select "Channel", then
press [OK]•
"Channel" menu will appear.
Use [A / V] to select "Auto Channel
Preset", then press [OK]•
Use [A / V] to select the type of
broadcasting signal, then press [OK]•
The unit will start getting channels available in
your area.
• When aerial antenna is connected, select
"Antenna".
• When connected to CATV, select "Cable
(Analog)" or "Cable (Analog / Digital)".
To cancel the auto channel preset during
scanning:
Press [RETURN] to go the previous screen or
[SETUP] to cancel.
When scanning is over, press [SETUP]
to exit•
To cycle through only the memorized channels, use
[CHANNEL -}- / --].
To select a channel directly (including the ones not
memorized), use [the Number buttons] and [ • ] (for
digital TV channels).
ilniilil
28 EN