Magnavox ZV457MG9A Owner's Manual page 29

You need to follow these steps when you turn on this unit for the first time.
iii!i
Follow the procedure in "Finding the
Viewing Channel on Your TV" on
page 22 to display "Initial Setup"
menu.
2
3
Use [A / V] to select your desired
language, then press [OK].
ii: ¸
Use [A / V] to select the type of
broadcasting signal, then press [OK].
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and digital TV
are automatically scanned and memorized. Only the
receivable channels in the area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog CATV are
automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable/
The channels broadcasted in analog CATV and digital
CATV are automatically scanned and memorized.
©
©
4
Ira PBS (public broadcasting station) is available
in your area, clock setting will automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then complete.
Press [RETURN] to exit.
If a PBS (public broadcasting station) is not
available in your area, press [OK]. Then proceed
to step 5 in "Manual Clock Setting" on page 32.
EN 27 .................