Table of Contents
Advertisement
Owner's Manual
ZV450MW8
D
V
IGITAL
IDEO
R
EAD YOUR
© 2007 Funai Electric Co., Ltd.
E9C80UD.indd 1
E9C80UD.indd 1
D
R
ISC
ECORDER WITH
V
C
IDEO
ASSETTE
T
HANK YOU FOR CHOOSING
N
EED HELP FAST
Q
G
/
O
'
UICK
UIDE AND
OR
WNER
S
M
YOUR
AGNAVOX PRODUCT MORE ENJOYABLE
I
F YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE
YOU MAY ACCESS OUR ONLINE HELP AT HTTP
1-800-605-8610
OR CALL
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
R
ECORDER
M
.
AGNAVOX
?
M
ANUAL FIRST FOR QUICK TIPS THAT MAKE USING
.
,
://
.
-
.
WWW
FUNAI
CORP
COM
.
WHILE WITH YOUR PRODUCT
2007/02/07 15:26:40
2007/02/07 15:26:40
Advertisement
Table of Contents
Related Manuals for Magnavox ZV450MWB
Summary of Contents for Magnavox ZV450MWB
- Page 1 Owner's Manual ZV450MW8 IGITAL IDEO IDEO EAD YOUR UICK F YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE YOU MAY ACCESS OUR ONLINE HELP AT HTTP OR CALL INSTRUCCIONES EN ESPAÑOL INCLUIDAS. © 2007 Funai Electric Co., Ltd. E9C80UD.indd 1 E9C80UD.indd 1 ECORDER WITH ASSETTE...
-
Page 2: Precautions
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS WARNING: APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. -
Page 3: Important Safeguards
Important Safeguards 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. - Page 4 Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. •...
-
Page 5: Maintenance
Maintenance Servicing • Please refer to relevant topics on “TROUBLESHOOTING” on pages 90-94 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. -
Page 6: Table Of Contents
Introduction PRECAUTIONS ........2 Important Safeguards ........3 FEATURES . -
Page 7: Features
This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording DVD mode VCR mode This unit is compatible with DVD+RW/DVD-RW, which is rewritable repeatedly and DVD+R/DVD-R, which is available for recording once. -
Page 8: Functional Overview
FUNCTIONAL OVERVIEW Front Panel 2019181716 ( * ) The unit can also be turned on by pressing these buttons or insert a cassette tape. 1. Cassette compartment (VCR) Insert a cassette tape here. 2. OPEN/CLOSE A button (DVD)* Press to open or close the disc tray. 3. -
Page 9: Rear Panel
FUNCTIONAL OVERVIEW Rear Panel 1. AC Power Cord (DVD/VCR) Connect to a standard AC outlet to supply power to this unit. 2. TV ANTENNA OUT jack (DVD/VCR) Use to connect an antenna cable to pass the signal from the TV ANTENNA IN to your TV monitor. 3. -
Page 10: Remote Control
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. Open the cover. Insert batteries. Make sure to match + and - on the batteries to the marks indicated in the battery compartment. - Page 11 FUNCTIONAL OVERVIEW 1. DISPLAY button (DVD/VCR) Press to display the display menu on or off. 2. DTV/TV button (DVD/VCR) Press to switch between digital TV mode (DTV) and analog TV mode. 3. SOURCE button (DVD/VCR) Press to select the appropriate input. 4.
-
Page 12: Front Panel Display
FUNCTIONAL OVERVIEW Front Panel Display 1. Current status of the unit : Appears when playback is paused. : Appears when playing back a disc or a cassette tape. : Appears when the timer programming or OTR has been set and is proceeding. : Flashes when all timer recordings have been finished. -
Page 13: Antenna Cable Connection
ANTENNA CABLE CONNECTION This section describes how to connect your unit to an antenna, cable box, etc. Disconnect the power cord of your TV from the AC outlet. Disconnect RF coaxial cable from antenna input jack of your TV. disconnect Connect cables to the unit. -
Page 14: Rf Modulator Connection
RF MODULATOR CONNECTION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. -
Page 15: Connection To A Cable / Satellite Box
CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. e.g.) rear of this unit DVD/VCR DIGITAL... -
Page 16: Connection To A Tv
CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device. VCR and basic DVD connection this unit Available on DVD only analog audio AUDIO IN RCA audio cable this unit DIGITAL AUDIO OUT DVD/VCR DIGITAL AUDIO... -
Page 17: Connection To An Audio System
CONNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the operation manual accompanying external devices for more information. Playing Back 2 Channel Analog Audio stereo system RCA audio cable DIGITAL AUDIO S-VIDEO... -
Page 18: The Vcr / Dvd Recorder Switching
THE VCR / DVD RECORDER SWITCHING Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [SOURCE]. DVD mode Press [DVD] on the remote control. (Verify that the DVD indicator is lit.) VCR mode Press [VCR] on the remote control. -
Page 19: Guide To On-Screen Displays And Menus
GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen display give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. On-Screen Display / Menu The on-screen display changes in the following order as you press [DISPLAY]. -
Page 20: Main Menu
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Setup Required Settings Playback... -
Page 21: Initial Setting
INITIAL SETTING You need to follow these steps when you turn on this unit for the first time. STANDBY-ON STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH E9C80UD.indd 21 E9C80UD.indd 21 Press [STANDBY-ON y y ]. -
Page 22: Channel Setting
CHANNEL SETTING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. Auto Channel Scan STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE CHANNEL CHANNEL REC MODE TIMER... -
Page 23: Adding / Deleting Channels
Adding / Deleting Channels You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding channel is only available for the analog TV channels. Make sure • You perform “Auto Channel Scan” before adding or deleting the channels. - Page 24 ANALOG Select the channel number to add or delete. • Use [CHANNEL ] to cycle through only the memorized channels. • Use [{ / B] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly.
-
Page 25: Setting The Clock
SETTING THE CLOCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 26. Auto Clock Setting This unit can set the time and date automatically by referring to a PBS station. -
Page 26: Manual Clock Setting
Manual Clock Setting Press [SETUP]. Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Clock Setting”, then press [OK]. Use [K / L] to select calendar or time, then press [OK]. Clock Setting VCR DVD JAN / 01 / 2007 ( MON ) -
Page 27: Tuner Settings
TUNER SETTINGS Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control and enjoy viewing the HDTV (high definition TV) programs as well as the SDTV (standard definition TV) programs with simple operation. Press [DTV/TV] on the remote control. -
Page 28: Selecting Tv Audio
This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded. Selecting TV Audio STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING... - Page 29 Selecting TV Audio (cont’d) STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH E9C80UD.indd 29 E9C80UD.indd 29 TUNER SETTINGS Analog TV Press [SETUP]. Use [K / L] to select “Required Settings”, then press [OK].
-
Page 30: Dtv Closed Caption
DTV Closed Caption Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH... -
Page 31: Closed Caption Style
Closed Caption Style Digital TV can also change the style of its closed caption such as font, color or size, etc. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP RAPID PLAY D.DUBBING SEARCH E9C80UD.indd 31... - Page 32 Use [K / L] to select the item and switch the setting for each item you want to set, then press [OK]. • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting”...
-
Page 33: Information On Dvd Recording
INFORMATION ON DVD RECORDING Before you make a recording, read the following information. Recordable Discs This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times. DVD-RW/DVD-R will be recorded in the DVD+VR mode automatically in this unit. -
Page 34: Before Recording
BEFORE RECORDING Make Recording Compatible Use this feature to make the unfinalized + VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Replace Disc Menu” set to “ON”, the title menu is automatically converted to our style. -
Page 35: Basic Recording & One-Touch Timer Recording
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. STANDBY-ON STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE CHANNEL CHANNEL REC MODE REC MODE TIMER TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH E9C80UD.indd 35 E9C80UD.indd 35... - Page 36 BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [REC I] to start recording. “I” will be displayed for 5 seconds. Press [PAUSE F] to pause recording. Press [PAUSE F] ] or [REC I] again to restart recording. To set one-touch timer recording (OTR)... This is a simple way to set the recording time in blocks of 30 minutes.
-
Page 37: Timer Recording
TIMER RECORDING STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE CHANNEL REC MODE TIMER TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • If you have not set the clock yet: “Manual Clock Setting” menu will appear instead of the timer programming list at step 1. - Page 38 Use [K / L] to select analog (“- - -”) / digital (“DTV”) mode or external input (E1 / E2), then press [B]. Timer Programming VCR DVD Date Start 1. JAN/01 11:57AM 10:57PM To record from external input (e.g., cable/ satellite box), select E1 or E2.
- Page 39 Checking, canceling, or correcting the timer programming information 1) Press [TIMER SET]. 2) Press [TIMER]. 3) Check the information on the list you will need. Timer Programming Date Start 1. JAN/01 12:57AM 1:57PM 4) To clear the timer programming: Use [K / L] to select the program, then press [CLEAR].
-
Page 40: Hints For Timer Recording
Hints for Timer Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • If a disc is not inserted, "DVD" on the front panel display flashes and timer recording cannot be performed. -
Page 41: Overwriting Unnecessary Title
OVERWRITING UNNECESSARY TITLE Overwriting from the Beginning of the Title You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y y ]. Make sure that the TV input is set on the unit. 2) Load the disc that includes a title to be overwritten. It takes a while to display the title list. -
Page 42: Hints For Overwriting
OVERWRITING UNNECESSARY TITLE Hints for Overwriting When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion, please check if there is no important title after the overwriting point. When overwriting title is shorter than the existing title: (overwriting from the beginning of the title) overwrite... -
Page 43: Settings For An External Device
SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to the unit by using input jacks either E2 (front) or E1 (rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (front). Use S-video or the RCA audio/video cables for this connection. -
Page 44: Recording From An External Device
SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 43. STANDBY-ON STANDBY-ON SOURCE SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE CHANNEL CHANNEL... -
Page 45: Setting A Disc To Protect
SETTING A DISC TO PROTECT To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note... -
Page 46: Playing The Discs In Other Dvd Players
PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc You will need to finalize discs to play back in other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. -
Page 47: Auto Finalizing
PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/:... -
Page 48: Dubbing Mode
You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the DVD or the cassette tape is not copy protected. Before starting this function, prepare for the recording on the DVD+RW/+R, DVD-RW/-R or the cassette tape. - Page 49 VCR to DVD Use [K / L] to select “VCR DVD”, then press [OK]. Dubbing Mode VCR DVD DVD VCR Press [SETUP] to exit. Press [VCR]. Press [PLAY B]. Then press [PAUSE F] at the point you wish to start recording. •...
-
Page 50: Information On Playback
INFORMATION ON PLAYBACK Before you play back DVD, read the following information. Playable Discs and Files This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. -
Page 51: Basic Playback
BASIC PLAYBACK Direct Playback STANDBY-ON STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP RAPID PLAY D.DUBBING SEARCH Note • Some discs may start playback automatically. • You can select images or information on the menu screen by activating PBC (playback control) function (page 50). -
Page 52: Playback From The Title List
Playback from the Title List STANDBY-ON STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • Some discs may start playback automatically. • You can also start playback by pressing [PLAY B] instead of [OK] at step 4. - Page 53 Use [K / L] to select a desired title, then press [OK]. SP (2Hr) NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 EMPTY TITLE 1:37:52 SP(2Hr) • For Video CD, when “PBC (Video CD only)” in “CD playback Mode”...
-
Page 54: Playing Back A Cd-Rw/-R With Mp3 Files
Playing Back a CD-RW/-R with MP3 Files STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU DISC MENU TITLE TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. -
Page 55: Using The Title / Disc Menu
Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. Press [DVD] first. 1) Press [TITLE] or [DISC MENU] to call up the title list or disc menu. -
Page 56: Special Playback
SPECIAL PLAYBACK Resume Playback You can play back from where you stopped playing back the disc last. Press [DVD] first. 1) During playback, press [STOP C]. The resume message will appear. Resume ON 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last. -
Page 57: Rapid Playback
Rapid Playback Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback. Press [DVD] first. -
Page 58: Zoom
Zoom Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK]. 0:00:00 3) Use [K / L] to select a desired zoom factor to zoom, then press [OK]. 0:00:00 Zoom menu will appear. There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate. -
Page 59: Search
Title / Chapter Search Using [PREV H] / [NEXT G] Press [DVD] first. 1) During playback, press [NEXT G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. •... -
Page 60: Time Search
Time Search Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK]. e.g.) DVD-video 0:00:00 e.g.) audio CD 0:00:00 The number next to will be highlighted. To move to the number next to When time search is not available, counter are not displayed. -
Page 61: Repeat / Random / Program Playback
REPEAT / RANDOM / PROGRAM PLAYBACK Repeat Playback Available repeat function may vary depending the discs. Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK]. 0:00:00 3) Use [K / L] to select a desired option to repeat, then press [OK]. -
Page 62: Program Playback
REPEAT / RANDOM / PROGRAM PLAYBACK Program Playback You can program the disc to play back in your desired order. Press [DVD] first. 1) Press [SETUP]. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [OK]. -
Page 63: Selecting The Format Of Audio And Video
SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. -
Page 64: Switching Virtual Surround System
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Press [DVD] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK]. 0:00:00 3) Use [K / L] to select “OFF”, “Type 1”... -
Page 65: Information On Disc Editing
INFORMATION ON DISC EDITING Guide to a Title List Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TITLE]. -
Page 66: Editing Discs
Deleting Titles You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. For DVD+RW/DVD-RW, when the last recorded title in the title list is deleted, the available disc space to record on will be increased. -
Page 67: Putting Names On Titles
Putting Names on Titles You can put title names on the titles and change the names from this menu. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE Follow steps 1 to 3 in “Deleting Titles”... -
Page 68: Setting Chapter Marks
Setting Chapter Marks You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY... -
Page 69: Clearing Chapter Marks
Clearing Chapter Marks STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents. - Page 70 Clearing Chapter Marks (cont’d) STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • Remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents.
-
Page 71: Hiding Chapters
Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • ”Hidden” will be displayed in the preview window while previewing the hidden chapter. -
Page 72: Setting Pictures For Thumbnails
Setting Pictures for Thumbnails You can set your desired scene as a thumbnail for each title. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • If the selected picture for a thumbnail is overwritten, the index picture is reset to the first scene of the title. -
Page 73: Dividing A Title
Dividing a Title You can divide one title into 2 new titles. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • You cannot divide a title of the disc when the number of recording titles reaches the maximum of 49, and the number of recording chapters reaches the maximum of 254. -
Page 74: Putting Name On Disc
Putting Name on Disc You can put a name on the disc and change it from this menu. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note •... -
Page 75: Setting Or Releasing Disc Protect
Setting or Releasing Disc Protect To prevent accidental editing, or erasing the titles, you can protect them. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH E9C80UD.indd 75 E9C80UD.indd 75 EDITING DISCS Follow steps 1 to 2 in “Putting Name... - Page 76 Setting or Releasing Disc Protect (cont’d) STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH E9C80UD.indd 76 E9C80UD.indd 76 EDITING DISCS Releasing disc from protect: Follow steps 1 to 2 in “Putting Name on Disc”...
-
Page 77: Erasing Disc
Erasing Disc You can erase all titles on a disc. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Note • When you select “Yes” at step 3, all contents of the disc will be erased. -
Page 78: Making Edits Compatible
Making Edits Compatible If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING... -
Page 79: List Of Setting
LIST OF SETTING The following table is the contents which you can set and the default setting. Refer to the following table for useful operation. Setup Items (highlight is the default) Video Input E1 (Rear) Page 43 E2(Front) TV Aspect Page 81 TV Audio Select Page 29... - Page 80 Setup Items (highlight is the default) Language Disc Menu Page 84 Audio Page 84 Subtitle Page 84 Parental Lock Page 85 OSD Language Page 86 Angle Icon Page 86 Screen Saver Page 86 FL Dimmer Page 86 Auto Chapter Page 34 Auto Finalize Disc Full Page 47...
-
Page 81: Setups
Required Setting Press [STOP C] if you are playing back a disc. Press [SETUP]. Use [K / L] to select “Required Settings”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. Required Settings Video Input TV Aspect 4:3 Letter Box TV Audio Select... -
Page 82: Playback
Playback STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: .@/: PQRS PQRS SPACE SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH E9C80UD.indd 82 E9C80UD.indd 82 SETUPS Press [STOP C] if you are playing back a disc. Press [SETUP]. - Page 83 Playback (cont’d) Disc Audio (Default: Digital Out) Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [K / L] to select a desired item, then press [OK]. Disc Audio Digital Out Dynamic Range Control Digital Out Set the digital audio output.
- Page 84 Playback (cont’d) Still Mode (Default : Auto) Select “Auto” usually. Use [K / L] to select a setting, then press [OK]. Video - Still Mode Auto Field Frame Your setting will be activated. Auto : Optimum resolution setting (“Field” or “Frame”) will be selected.
- Page 85 Playback (cont’d) Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.
-
Page 86: Display
Display STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE .@/: PQRS SPACE DISC MENU TITLE CHANNEL REC MODE TIMER CM SKIP D.DUBBING RAPID PLAY SEARCH Press [STOP C] if you are playing back a disc. Press [SETUP]. Use [K / L] to select “Display”, then press [OK]. -
Page 87: Vcr Functions
VCR FUNCTIONS Playback 1) Press [STANDBY-ON y] on the remote control or the front panel of the unit. When you are playing back a cassette tape, turn the TV on and be sure to select the input to which the unit is connected. -
Page 88: One-Touch Timer Recording (Otr)
One-touch Timer Recording (OTR) This feature allows you to set the recording length simply by pressing [REC I] on the remote control. Press [VCR] first. 1) During normal recording, press [REC I] to begin the one-touch timer recording. You can select a fixed recording time by pressing [REC I] repeatedly. -
Page 89: Time Search
Time Search This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Press [VCR] first. 1) Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears. -
Page 90: Troubleshooting
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom The power does not turn on. - Page 91 Symptom There is no picture. Picture noise appears. Playback picture from the external devices connected to this unit is distorted. There is no sound. Sound is noisy. No DTS sound is output. The disc does not play back. Discs recorded on this unit cannot be played back on other DVD players.
- Page 92 Symptom “Repairing” appears on the TV screen. Repairing In a case you intend to cancel the repairing process. Do you want to cancel a repairing process ? When selecting “Yes”, the disc may not be usable. Repairing Picture noise appears. The casette tape does not play back.
- Page 93 Error message Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. Region Error — Please eject the disc. — Playback is not authorized in your region. Parental Lock On The current selected parental level prohibits playback.
-
Page 94: Frequently Asked Questions
Frequently Asked Questions – Can I record to CD-RW/-R? – Can I play back DVD-video that is bought in another country? – Can I connect the unit to my PC? – Can I program a timer recording with cable/satellite box? –... -
Page 95: Language Code
LANGUAGE CODE Language Code Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian 4853 Burmese 5971 Byelorussian... -
Page 96: Glossary
Analog Audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square);... -
Page 97: Specifications
SPECIFICATIONS General System VCR video heads Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity TV format Recording Recording format Recording discs Video recording format Sampling frequency Compression format Audio recording format Sampling frequency Compression format Tuner Tuning system... -
Page 98: Español
Discos Reproducibles Este aparato es compatible con la reproducción de los siguientes discos y archivos. Discos reproducibles DVD-video DVD+RW DVD+R DVD-RW (Sólo discos en modo de video finalizados) DVD-R (Sólo discos en modo de video finalizados) CD-DA (CD de audio) CD de video CD-RW CD-R... - Page 99 Conexión Básica 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión básica ilustrada más abajo. DVD/VCR S-VIDEO IN --- AUDIO --- OUT IN --- VIDEO --- OUT parte trasera de su televisor cable de cable de audio RCA...
- Page 100 Configuración Inicial Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. Presione [STANDBY-ON y y ]. Antes: Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. Utilice [K / L] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo.
- Page 101 Grabación con Temporizador Usted puede programar el equipo para que grabe hasta 8 programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales. Antes de grabar, asegúrese de que • Antes de establecer una programación del temporizador configure el reloj. •...
-
Page 102: Limited Warranty
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.