Before Recording - Magnavox ZV457MG9A Owner's Manual

"IIIIIi'IOUBL HOOTINQ
No image from HDMI connection.
There is no sound or the sound is
distorted.
Setup menu cannot be called up.
There is no picture.
Picture noise appears.
There is no sound.
Sound is noisy.
No DTS sound is output.
The disc does not play back.
• Check the HDMI connection. (Check the status of the HDMI related
indications.)
• Check whether the connected monitor device or other device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
• Check the setting of HDMI.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• If the unit is connected to the unauthorized display device with an
HDMI cable, the audio/video signal may not be output when playing
back a commercial DVD-video.
• The HDMI sound is not output when "HDMI Audio" is set to "OFF".
• Check the RCA audio cable connection. If you are using HDMI-DVl
conversion cable, you must connect the RCA audio cable, too.
• Check whether the output format of this unit (HDMI FORMAT) matches
the supported input format of other connected device.
• Setup menus cannot be called up during DVD recording or DVD playback.
• If the main menu appears on the TV screen, press [RETURN] to exit.
• Check if the progressive scan mode is set correctly according to your TV
(page 91).
• Clean the disc with a cleaning cloth.
• If you are using DIGITAL AUDIO OUT (COAXIAL)jack, check the setting in
"Disc Audio" (pages 86-87).
• Clean the disc with a cleaning cloth.
• Clean the disc with a cleaning cloth.
• This unit is not compatible with DTS sound.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 56).
• The region code on the DVD-video does not match the unit (page 56).
• Moisture has condensed inside the unit. Remove the disc and leave the
unit turned on for about 2 hours until the moisture evaporates (page 3).
• If the disc was recorded on another recorder, the unit cannot play back
the disc if it was not finalized.
Discs recorded on this unit cannot be • If you are using DVD-RW/-R, please ensure you finalized the disc after
played back on other DVD players, recording (pages 54-55).
The disc does not start playback from • Resume playback was activated (page 62). Press [STOP m] twice.
the beginning. • You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
The unit starts playing back the disc • The DVD-video features an auto playback function.
automatically.
Some functions such as stop, search, • Depending on the disc, you may not be able to do some of the
or slow-motion playback cannot be operations. Refer to the instruction manual supplied with the disc.
performed.
The language for the sound track • The title does not have the multilingual audio tracks.
cannot be changed. • The DVD-video prohibits the changing of the language for the sound
track.
The subtitle language cannot be • Multilingual subtitle are not recorded on the DVD-video.
changed or turned off.
The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc
contains a multi-angle portion. Actual change will be performed when
the portion has come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video's menu.
• It may take a few seconds for the unit to input disc data before
recording stops.
Recording does not stop immediately
after you press[STOP m].
98 EN