Smartpicture/Fm Radio - Philips CCB134AT Owner's Manual

58 SmartPicture/FM Radio
SmartPicture
The SmartPicture feature allowsyou to improve the TV/VCR's pic-
ture when viewing sports, a movie, or video games;to improve the
picture when the antenna/cablesignalis weak; or to reset the picture
controls to their original settings.
I
l'-
Press the COMBI button, then press the SMART PICTURE |
button repeatedly until the SmartPicture mode you want III
1
appears on the screen. Your selection will remain on the screen
I
for about tO seconds,then disappear.The following options will be
available.
_C339
PHILIPS
SPORTS
MOVIE
WEAK SIGNAL
VIDEO GAMES
_'V RESET
Use to watch a _orts program.
Use to watch a movie.
Use when the picture is weak.
Use when playing a video game.
Use to reset the picture controls to
their original settings.
FM Radio
Follow the steps below to listen to FM radio stations.
I
2
Press the FM button to select FM mode. The radio frequency
appears on the TV/VCR screen, moving around the screen every few
seconds.
FM 88.0MHz
Press the CH(annel) n_/_7 button until your desired radio
frequency appears.
i i
G3 rT G3 U
CDO3G3
-2
Helpful Hints
ToeK_tFM mode and return to TV mode, press the FM button.
If you turn off the TV/VCRin FM mode, the TV/VCR will be in TV mode when you turn on the TV/VCR again.
Youmay get better FM recep_on by repositioning the TV/VCR.
The TV/VCR's FM radio has a buil_4n antenna with a band range of 88.0 - 108.0MHz.
Youcannot record the FM radio station.
Youcannot switch to FM mode during tape playback, although tape playback is allowed while in FM mode.
Youmust be in TV mode in order to select Line Input mode (A/V IN).
If you receive a weak radio signal, you may go to TV mode and switch between the internal (INT) and external (EXT)
antennas.When you select the external antenna, make sure your antenna or cable is connected to the ANT(enna)
Jack on the TV/VCR.Details are on page six.
I) Press the FM button to return to TV mode if necessary.
2) Press the COMBI button, then press the MENU button.
3) Press the PLAY/,&. b utton or the STOP/V button to select FM ANTENNA.
4) Press the REW(ind)/_l button or the F.FWD/I_ button to select INT or EXZ
5) Press the STATUS/EXIT button.