Philips CCB134AT Owner's Manual page 21

Setting t heRemote t o Operate a Cable B0x/DBS (cont'd) 2 1
5
Within 30 seconds, press the Number buttons to enter
the two-digit code for your Cable Box/DBS. For example,if
you havea Zenith Cable Box, pressNumber buttons 0, 7.
6
Repeat step I. If the remote control works your Cable
Box/DBS, you're finished.If the remote control still doesn'twork
your Cable Box/DBS,repeat steps 2-5, usinga different code for
your brand,if available.
6-r-
0
C_3C_3CD
CZ3C_3C_3_
C31_38 0
Z3_T_
PHILIPS
-5
J
There is no guarantee
that the remote control
will work your Cable
Box or DBS.
Helpful I'li_ i!
Although the remote control that
comeswith yourTV/VCRwill work
most CableBoxesand DBSs,it is
possiblethat the remote control will
not operateyour CableBoxor DBS.
The remote control may only oper-
ate some featuresof your Cable
Boxor DBS.For example,some
CableBoxesmay only be turned on
at the Cable Box,therefore the
remote control will not be able to
turn on the CableBox.
Pressthe CABLE/DBS button before
pressingany buttonsto operatethe
CableBox/DBS.
If you had to program the remote
control to operate your CableBOxor
DBShere,wheneveryou replacethe
batteries in the remote control,you
will have to program the remote
control again.