Table of Contents
Advertisement
Automatic Operation Features 5 7
Automatic
Playback
When you put a tape in theTV/VCE, the power will come on
automatically.If the tape's record tab is missing,playbackwill
begin.If a timer recording is set, the power will not come on auto-
matically when you insert a tape with the record tab intact.If a
timer recording is set and the TV/VCR power is off, the TV/VCR
will eject the tape if the record tab is missing.
Automatic
Rewind,
Eject,
Off
When a tape is played, f ast forwarded, or recorded to its end,the
"I'V/VCE will rewind the tape, stop,turn itself off, and eject the
tape. If a real-time counter memory is set,the'l'VIVCE may only
rewind the tape to the point at which the real-time counter is set
to zero.The TV/VCR will not turn itself off or eject the tape.
Memory
Rewind,
Power
Off
When the POWER button is pressedwhile the TV/VCR is rewind-
inga tape, EEW -* POWER OFF will appearon the screen. The
TV/VCR will turn itself off when the tape hasfinishedrewinding.
If a real-time counter memory is set,the'i-V/VCE may only rewind
the tape to the point at which the counter was set to zero, then
turn itself off.
Tape Eject
A tape can be ejected with theTV/VCE power on or off (but the
TV/VCE must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCE power,then eject the tape. Be sure to insert a tape and
turn off theTV/VCE power for the timer recording.
Automatic
Tracking Adjustment
TheTV/VCK automaticallyadjuststhe tracking to give you the
best possiblepicture quality.With some recordings, however,you
may get a better picture usingthe manual tracl_ing controls(see
below).
Manual Tracking
To adjustthe trackingmanually,press the CHANNEL A/v
but-
tons on the "I-V/VCRor the TRACKING _
button on'the
remote control.
Trackingreturns to Automatic TrackingAdjustment when a tape is
inserted or when the STOP/v button is pressed.
Before
Tracking
Adjustment
After
Tracking
Adjustment
Advertisement
Table of Contents
