Real-Time Counter Memory - Philips CCB193AT Owner's Manual

40 Real-Time Counter Memory
• • .° •° ° • ° °°•.° ° • 6***1 ***ooo*** *,l*** ******to************ .**************m ***.46 i****tl .6._***_,, *****tj*,,i.***.
Follow the stepsbelow to reset the real-time counter to zero at a
tape location you want to refer to later.
I
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
CHI0
P I :23:45
3
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
4
While the counter remains on the screen, press the MEM-
ORY button so that M appears on the screen. To erase a
real-time counter memory,pressthe MEMORY button so that the
M disappears from the screen.
M 0:00:_
J
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/_l button or the
F.FWD/I_ button when playback is stopped.When the
tape reaches the point at which the counter was set to
zero, the tape will stop. Press the PLAY/A button to
watch the tape.
PHILIPS
Helpful H an
......
The real-time counter memory will
not function during Repeat Play
mode. Details are on page 37.
-Youmay only set one real-time
counter memory at a time. If you
set the real-time counter to zero at
a second location, the previous real-
time counter to zero setting will be
10st.