Timer Recording - Philips CCB193AT Owner's Manual

Checking or ClearingTimer Recordings
I
With the TV/VCR on, press the MENU button.
2
Press the PLAY/A button or the STOP/Y button to select
VCR PROGRAM, then press the F.FWD/I_ button.
3
Press the PLAYIA button or the STOP/V button to select
PROGRAM REVIEW, then press the F.FWD/I_ button. The
timer recording information for the program in the lowest num-
bered position will appear on the screen. If no timer recordings
are programmed, nothing will happen when you select PROGRAM
REVIEW and press the EFWD/I_ button.
4
Press the F.FWD/I_ button to display information about
the next programmed timer recording. (If you do not press
a button within 10 seconds, information about the next pro-
grammed timer recording will appear.)This will continue until all
positions have been displayed.Then, the menu will disappear.You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the timer recording displayed, press the CLEAR
button. Either the display will disappear or information about
other timer recordings will appea_ If you do not press any other
buttons, the display will disappear after all timer recordings have
been displayed.
6
Repeat steps I-4 to make sure you have cleared the cor-
rect position.
i m
C3 CZ3 Q
CS3
© L
5
Helpful Hint :'_ _
With ShowGuard, you don't have to
worry about losing your timer
recordings. If the power fails, pro-
gram/ned timer recordings will be
restored when the clock is reset.
(The clock will reset itself automati-
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
clock manually. Details are on pages
12-13.) The timer recording will not
occur only if the timer recording was
scheduled to take place during the
power failure.