Philips CCB193AT Owner's Manual page 17

5
Press the PLAY/A button or the STOPIY button to select elf Wait for the TV/VCR to
SET PRS CH. MANUAL.Then, press the F.FWD/I_ but- / find the time.
ton.
SELECT CHANNEL NUMBER
END PRESSEXIT
6
Use the Number buttons to select your PBS station.
7
NOW SEARCHING flashes on the TV/VCR screen.
8
When the TV/VCR finds the clock data, the time will
appear on the screen. Press the STATUS/EXIT button.
_AUTO CLOCK (PBS) CH _2
TIHE 06 : 30 PM
OATE 07 / 01 / 2000
SATURDAY
TO END PRESSEXIT
• If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAYIA button or the STOPIV button to
choose SELECT NEW PBS CH.Then, press the
F.FWD/I_ button. Repeat step 6.
• If CANNOT FIND CLOCK DATA flashes on the
TVIVCR screen and you do not know another channel,
press the PLAYIA button or the STOP/Y button to
select SET PBS CH.AUTO. Then, press the RFWD/_
button. The TV/VCR will search for the PBS channel automati-
cally.
• If the PBS channel is found, the time will appear on the screen.
• If the PBS channel is not found, you will be prompted to turn
off the TVNCR. Leave it off for several minutes.When you turn
on the TV/VCR again, the time will be set.
6
5
Helpful Hints
If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection, you
may select channels 1-125 at step
6. Details about available memo-
rized channels are on page I I.
To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 26.