Real-Time Counter Memory - Philips CCZ190AT99 Owner's Manual

CCZ190comb.QX33 4/5/99 9:51 PM

44 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on-screen.
01:08 PM STOP
CH10
SLP 1 : 23 : 45
3
While the counter remains on-screen, press the CLEAR
button to reset the real-time counter to zero.
0 : 00 : 00
4
While the counter remains on-screen, press the MEMO-
RY button so that M appears on-screen. To erase a real-
time counter memory, press the MEMORY button so that the M
disappears from the screen.
M 0 : 00 : 00
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind)/SEARCH s button or
the FF/SEARCH B button when playback is stopped.
When the tape reaches the point at which the counter
was set to zero, the tape will stop. Press the PLAY/o but-
ton to watch the tape.
Page 44
2
POWER MENU STATUS/EXIT CLEAR
1 2 3
MEMORY
4 5 6
CHANNEL
7 8 9
0 +100
ALT.CH
SLEEP
VOLUME MUTE
SPEED
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR STOP/ PAUSE/STILL
1,5
Helpful Hints
• The real-time counter memory will
not function during Repeat Play
mode. Details are on page 41.
• You may only set one real-time
counter memory at a time. If you
try to set the real-time counter to
zero at a second location, the previ-
ous real-time counter to zero setting
will be lost.
3
4