Philips DVD740VR Owner's Manual page 8

8 Hookups
(cont'd)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • m
DVD/VCR to TV only
Simplest connection using only supplied black RF coaxial cable
This connection will let you use the features of both the VCR and the DVD Player.
Disconnect the antenna or cable from your TV and connect it to the ANT-IN (Antenna In)Jack of your DVD/VCR.
Antenna Back of DVD/VCR
Indoor/Outdoor
(300 ohm) _
ANTqN
Cable
(75 ohm)
AN_OUT
CH3 CH4
Connect the supplied black RF coaxial cable to the ANT-OUT (Antenna Out) Jack on the back of the DVD/VCR and to the
ANTENNA IN Jack on the TV.
Antenna or
Cable
In Jack
Black RF
(on back of TV)
coaxial cable
(supplied) example only
3
4
Plug in the power cords of the TV and the DVD/VCR.
Set the CH3/CH4 switch on the back of the DVDNCR to CH3 or
CH4, whichever TV channel is not used or least used in your area. Set the
TV to the same channel. For example, if the CH3/CH4 switch is set to
CH3, the TV should be on channel 03.
5
i ! iiiiiiiiiii
You are ready to turn on the DVDNCR. Go to page 15 before turning
on the DVDNCR.