Audio Settings - Philips DVD740VR Owner's Manual

70 Audio
Settings
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • m
Choose the appropriate Audio Settings for your equipment. These
settings only affect the playback of the DVD Player of the
ovo.o 5 4
Before you begin, place the DVD/VCR in DVD mode. Press
OUTPUT SELECT so the red DVD light appears on the front of
the DVD/VCR.
While playback is stopped, press DVD, then press SETUP. The SETUP screen will appear.
2
3
4
5
....... :1
1 LAr_uJ_GE
E×I _ EL
Press the Number 3 button to select AUDIO.
Press A or v to select an item, then follow step 4
accordingly.
@ If you selected DRC, press OK repeatedly to turn
Dynamic Range Control (DRC) ON or OFF. This levels
the sound volume by suppressing loud sound and raising
the volume of low sound.
If you selected DOLBY DIGITAL, press OK
repeatedly to turn DOLBY DIGITAL ON or OFF. Select
ON if you connected the DVDNCR to a stereo that is
Dolby Digital compatible. Details are on page 13.
® If you selected MPEG, press OK repeatedly to
turn MPEG ON or OFF. Select ON when the DVD/VCR is
connected to an MPEG-compatible Stereo.
If you selected DOWN SAMPLING, press OK.
Then, press A or v to select AUTO, 48 kHz, or 96
kHz, then press OK. The AUDIO CONTROLS menu
will reappear.
Select 96 kHz if the DVD was recorded in PCM (Pulse
Code Modulation) 96 kHz. Otherwise, select 48 kHz.
DRC DOLBY DIGITAL
MPEG
×T _ Cat_CELm_l
DOWN SAMPLING
Press SETUP to remove the menu.
0 0 0
3-
c
©®®
®®®Q/
@® 0
PHILIPS
• Setting DOWN SAMPLING to
96kHz activates copyright protec-
tion and mutes the sound.
Selecting AUTO sets downsam-
piing to 48kHz.
• MPEG represents the Motion
Picture Experts Group.