Clock (Vcr) 27 - Philips DVD740VR Owner's Manual

Clock (VCR) 27
Follow the steps below to set the clock for the VCR. Make sure:
@ The DVD/VCR is on and the VCR/TV light appears on the
front of the DVD/VCR. (If it does not, press VCR/TV once.)
@ You make each entry within 60 seconds of the previous entry.
@ Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR.
1
Press VCR, then press DISC/MENU.
Press PLAY II_ (A) or STOP • (v) to select SET
CLOCK, then press FF _ (1_).
Press PLAY II_ (A) or STOP • (v) to select SET CLOCK, then press FF _ (1_).
I TIME : 1
DATE / /
TO END PUSH EXIT
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1
for AM or 2 for PM. For example, for 2:15 PM, press 02,
15,2.
I TIME 02:15 PM
MONTH / /
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
_nKER
O
_EpEA_ REpE_T
© ®
®
-6
PHILIPS
Press two Number buttons for the month, two Number buttons for the day, and two Number but-
tons for the year. For example, for July 1, 2002, press
07, 01, 02. The day of the week will appear automatically.
6
I TIME OZ :15 PM 1
DArE 07 / 01 / 02
MON
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Press DISPLAY/STATUS/EXIT.
Enter a 0 before a single-digit
number.
Entries that do not match the
DVD/VCR's clock or calendar will
cause a question mark to appear
on the screen.
To make corrections, press CLEAR
until the space for the number you
want to correct is flashing. Then
enter the correct number.
To see the current time on the TV
screen, press DISPLAY/STATUS/
EXIT. Details are on page 30.
Power failures can erase the clock
setting.