Magnavox 42MD459B User Manual page 55

'° U i
NFAQ
z
My remote control does not work.
What should I do?
• Check the antenna or cable connection to the main unit.
• Check the batteries of the remote control.
• Check if there is an obstacle between the infrared sensor window and the
remote control.
• Test the signal output. If OK, then possible infrared sensor trouble.
(Refer to"lR Signal Check" on page 58.)
• Aim the remote control directly at the infrared sensor window on the front
of the unit.
• Reduce the distance to the unit.
• Re-insert the batteries with their polarities (+/- signs) as indicated.
• When there is an infrared-equipped device such as PC near this unit, it
may interrupt the remote control signal of this unit.
• Move the infrared-equipped device away from this unit, change the angle
of the infrared sensor or turn off the infrared communication function.
How come the Initial setup appears every , connect the RF coaxial Cable tothe unit directly and rUn the initial setUp,
time I turn on this unit? ' Make sure to complete the channel scan before turning off the unit.
• Make sure autoprogram has been completed.
(Refer to"Autoprogram" on page 22.)
• Autoprogram must be completed when you set up the unit for the first
time or move it to a location where previously unavailable channels are
broadcast.
• The selected channel may not be broadcasting.
• When autoprogram is interrupted and not completed,
Why I cannot watch some of TV programs.
some channels will not be received. Make sure to complete.
(Refer to"Autoprogram" on page 22.)
• The selected channel cannot be viewed by the"Child Lock" setting.
(Refer to "Child Lock"on page 30.)
• The unit requires some kind of antenna input. An indoor antenna (VHF /
UHF), an external antenna (VHF/UHF) or an RF coaxial cable from your
wall cable/satellite box needs to be plugged into the unit.
; checkifthe right nput mode is Se!ected by presiing [SOURCF] 0r US ng
[Cl.i + / -]. (Refer to!!Switching Each Input Mode! on page 19.)
How come there is n0 image from the, Check the antenna or cable connection to the unit.
connected external devices? ;when Using the CompOsite Video Connection check that the Green
................................................................ (Y); Blue (PbiCb)and Red (Pr!cr) connectors are €onnected tO their
corresponding colored jacks on the unit.
• Many digital channels have alternate channel numbers. The unit changes
Whenever I entered channel number, the numbers automatically to the ones signifying the broadcasting
it changes automatically, stations. These are the numbers used for analog broadcasts.
;; Clean the disC,
Ensure the disc is C0rrectly inserted.
My disc cannot be played back:, Check if the disc is defective by trying another disc,
Cancel the parental lock or change the control level
Is there any way I can play my disc? Insert a correct disc that plays back on this unit,
t Handle a disc with special care so that it does not have fingerprints,
scratches or dusts on its surface.
• Captions that are delayed a few seconds behind the actual dialogue are
Why are captions not displayed entirely? common for live broadcasts. Most captioning production companies can
Or, captions are delayed behind the display a dialogue to maximum of 220 words per minute. If a dialogue
dialogue, exceeds that rate, selective editing is used to insure that the captions
remain up-to date with the current TV screen dialogue.
I
How can I set the clock ? ' There is no clock function on this unit:
EN