Advertisement
-- Auto
Programming (see previous
Zlpage)
adds all the channels it
can find (on your Antenna or Cable
TV system) into the TV's memory.
Add/Delete Channels makes it easy
for you to add other channels, or
drop unwanted channels, from the
list of channels in the TV's memo_'.
"/1,_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word CHAN.'NEL with the
TV's on-screen arrow.
_,_
Press the CHANNEL • or •
buttons (or Channel Number
buttons on the remote) to select the
channel you want to SAVE (or
DELETE.)
_,_
Press the (+) button to SAVE
the selected channel number into
memory.
Press the (-) button to DELETE
a channel from memory..
_)
Press the STATUS
button
to
clear the screen after adding all the
channels
you want.
Try it ore. Press the
_ CHANNEL••
buttons.
The channels you SAVED should
appear. Th_ channels you
DELETED should not appear.
Remember, you can also add the
VC_'AUX mode (see page !6)
into the TV's channel memory'.
Then by pressing the CH • •
buttons you can quickly select the
Audio/Video Input jacks on the
rear of the "IV. Just "'SAVE" the
VCP,/AUX mode (located between
the lowest and highest channe!
numbers) into the TV's memory.
U
7
Advertisement
