Advertisement
OseTE: If you went through
tup (in your Quick Use
Guide),
this task has already been
completed
for you.
Your TV can automatically
set
itself for local area (or Cable TV)
channels.
This makes it easy for
you to select only
the
TV stations
in your area when the CH(annel)
• Y buttons
are pressed.
j<;.....
<,_,,> Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word PROGRAM with the
TV's on-screen arrow.
_2_
Press the (+) button (on the T'V
or the remote) to PROGRAM.
___
Press the (+) button
to
again
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
Press any button (on the TV or
remote) to stop the channel search
a,:any time. When the channel
search is completed the TV will
return to the last viewed channel.
_,,
Press STATUS button to clear
l the screen
TL it out. Press
CHANNEL
AY
buttons and
see which channels have been added.
Remember. if you want to drop any
unwanted channels from the TV's
memoD', see the next page on how to
"Manually" add and delete channels.
Note: As the TV searches for
channels to "ADD" into memory"the
on-screen display may move (or
jitter slightly). This is normal
operation and does not indicate a
need for service.
"'RED" channel ,numbers have been
added to the TV+s rnemor).'.
"'WHITE" channe! numbers arc ,",,m
ptesenl it, the TV's program memo,')'.
!
!
L
AUTO..PRO_RAMMING IN PROCESS
AUTO-PROGRAMMING IH PROCESS
J The T%: screen will be blocked off
J
i undi _he se'_ch for chan_ls
is
[
j done.
Advertisement
