Advertisement
|
See the above information
on
how to use :he Loca_or Code
ButtonforProgr_-nmlng.
<
For most homes this step would
not be needed
but for your
information:
Up to 9 different remote locator
address codes can be set on which the
TV can send out its "homing" signal.
This is done in case there is more than
one TV (with a remote locator)
present,
and you want only one
specific remote to be signaled when the
TV is turned OAt.*
To se: a Locator Address Code:
>
With TV turned ON, press the TV
System button first and then the
LOCATOR
CODE button on the
remo_e.
You will need a pencil or pen to press
the recessed button.
The .'FV shows the present Remote
Loca:or Code.
,_
Press
number button (0-9)
any
on
the remote to set or change the Locator
Code.
"Fne remote will
beep
to let you know
it has received the new Locator Code
and then return to its normal operating
mode.
Remember, if batteries are replaced the
Locator Code will need to be
reentered.
When setting the Locator Code if any
button, other than the number buttons.
are pressed the remote will return to its
nomaa! operation mode.
*For owners who live in an apartment
(townhouse or condominium)
complex, this task may be n_essary
since the remote locatofs signal can be
sent and detected directly through
adjoining walls.
19
Advertisement
