Advertisement
OhW that you have looked up
e two-digit
Remote
Code
Nurnber for your brand of Cable
Converter
(on previous
page),
you are read), to follow
the four
simple
steps below.
Please read through steps 1-4
before be_nning.
<,_
Press and release the REC
(RECORD) button.
"./2,_
Within thirty seconds after
releasing the REC button, press
and release the CBL System
button.
"-" 5,,_
Within thirty seconds after
releasing the CBL System
button, ENTER THE TWO
DIGIT CODE NUMBER for
the desired Converter. The
remote is now ready to send
commands to the Converter.
A
<4,,,_
Point the remote at the
Converter. Press the PO_'ER
button on the remote to turn the
Converter ON.
it
The Channel
Try
out.
and POV_'ERbuttons on the
remote should now operate the
Converter.
Remern_r.
if this doesn't work
the first time, repeat steps using
the same remote code number.
tf after a second try the remora
does not operate your Converter,
and there are more code numbers
listed for your brand Converter,
use the next listed code number.
If after repeated attempts the code
number method does not work
your Converter. t_" the
"CON_;ERTER SEARCH"
method on page 26.
Cable Converter
2S
Advertisement
