Table of Contents
Advertisement
• While setting
a program;
press STOP/EJECT
but-
ton on the VCR. This function cannot be done by the
remote control.
• After
setting
a program;
(power
must
be on)
First,
press
QUICK
SET
PROGRAM
button.
Then, press STOP/EJECT
button
on the VCR. This
function
cannot be activated
by the remote
control.
• While
recording
is in progress;
press
STOP
/EJECT
button on the VCR. This function cannot be
activated
by the remote control.
TO CHECK
THE START/END
TIME
1) Press POWER/TIMER
REC button
so that "[]"
in-
dicator appears.
2) Press QUICK
SET PROGRAM
button
once. Both
the start and end time will appear for 3 seconds each,
and return to the Timer Stand-by
mode.
..
_,,
]
c.
START
TIME
,.s ....
S3O_
6 I
"_
_'c.
]
END TIME
_.D
I I:BD_ S I
I
sp
4,
"_
_"'
CURRENT
TIME
6:D'TP,
• If there is a power failure or the VCR is unplugged
for more than 3 seconds,
the clock setting
and all
timer settings
are lost.
• If the tape runs out before the end time, the VCR will
switch to the Stop mode immediately,
eject the tape
and the VCR power will be turned off. The "@" in-
dicator will flash.
• If a tape is not inserted or the erase-protection tab is
removed, the "[Z" indicator flashes and automatic
timer recording cannot occur. Insert a tape that allows
recording.
• The TV that is connected to your VCR may be turned
ON or OFF when the VCR is in the timer-record mode.
• When you record a cable channel program with cable
converter box, first set the VCR' s channel to 3 or 4
whichever is the output channel of your cable con-
verter box. Then set your cable converter box to the
channel you want to record and leave on while you
are recording with power on.
USING
THE
AUTO
RETURN
BUTTON
After recording
the program(s)
by using the timer, you
can return to the beginning
of the program(s)
automat-
ically by pressing
the AUTO RETURN
button.
1
Start Auto Return
When
all the timer
recordings
are completed
("[_"
flashes),
press AUTO RETURN
button on the VCR at
once. The VCR will rewind
to the beginning
of the re-
corded program(s).
NOTE:
If there
are any remaining
programs,
press
POWER
button
to turn on, then press AUTO
RE-
TURN
button. But In this case, if you press any other
button once and press AUTO
RETURN
button,
the
Auto Return will not be done.
USING
THE/VIA IN MENU
If you select
auto return
to [AUTO]
from the menu,
when all the timer recordings
are completed,
the VCR
will rewind to the beginning
of the recorded
program(s)
without
pressing
AUTO
RETURN
button.
NOTE:
If there are any remaining
programs
including
Daily & Weekly,
this function does not be done.
1 Select the main menu
Press MENU
button.
2
SeleCt "VCR SET UP"
Press CHANNEL
• or • button repeatedly to point to
"VCR SET UP".
Then, press SELECT
button.
3 Select "AUTO RETURN"
_-
........
")
Press CHANNEL
• or • button
l
_c_
....
/
repeatedly
to point to "AUTO
_
_i°_+_ "
,o., ]
REVJRN".
j
4
Select "AUTO RETURN" to [AUTO]
Press SELECT button so that
[AUTO]
will appear
next to
"AUTO RETURN".
5
To return to TV mode
Press MENU
button.
VCR SET UP
1
TAPE SELECT
-T130
REPEAT
PLAY
RENTAL
AUTO
RE'rURN
[AUTO]
AUDIOOUT
TV STEREO
ION I
SAP
WATCH
THE
RECORDED
PROGRAM
Press POWER
button
to turn on the VCR. Then, press
PLAY button.
EN
- 27 -
6A12
Advertisement
Table of Contents
