Table of Contents
Advertisement
5EAI¢,ISti
Make
sure
...
• VCR power must be turned on.
• Turn on the TV and set the TV channel
to the same
video output channel
as located
on the back of the
VCR. (CH 3 or 4)
• Press TV/VCR button so that "VCR" appears on the
display.
• You must use the remote control for the following
procedure.
• A video cassette must be inserted in the VCR for
these functions to work.
This feature can be used to memorize
a beginning
point
that you want to review. And you can search it easily by
rewinding
or fast forwarding.
• Insert a prerecorded
tape.
• If the counter
is not displayed,
the Counter
Mem-
ory will not be activated.
Press SELECT
button
so that the counter
appears
on the TV screen.
7 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point
at which you want to review.
2
Reset the counter to 0:00:00
Press TAPE COUNTER
RESET button.
3
Select the Counter
Memory mode
Press TAPE COUNTER
MEM-
(
ORY button
so that "M" appears
on the TV screen.
M
o:I 2:3o
f
4
Begin recording
or playback
Press RECORD or PLAY button.
Press STOP button when recording or playback is com-
pleted.
5
To activate the Counter Memory
Press REWIND
(or F.FWD) button. The tape will auto-
matically
stop when the counter returns to 0:00:00 (ap-
prox.).
TO EXIT
THE COUNTER
MEMORY
When
the counter
appears
on the TV screen,
press
TAPE COUNTER
MEMORY
button
once
and then
the SELECT
button
twice
so that the "M" and the
counter
disappears
from the TV screen.
The Time Search function makes it possible
to quickly
advance
the tape to your desired position
from any po-
sition by entering
the exact amount of playback
time of
the part that you want to skip.
Example:
To watch a program
after 2 hour 50 minutes
from present
position to forward
direction.
1
Select "TIME SEARCH" mode
Press TIME SEARCH
button.
2
Enter your desired time
Press CHANNEL • or • button
repeatedly
until your desired
time appears. (Example: "2:50"
for 2 hours 50 minutes)
T4_S_,_GH
3
Begin Time Search
Press REWIND
or EFWD button.
The VCR begins re-
winding
or fast forwarding
to the specified
point.
The time counts down as the searching
progresses.
4
After Time Search
When 0:00 is reached, the VCR will start playback auto-
matically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes
(9:59).
• This function will not operate in recording
mode.
• Procedures
must be followed
within
30 seconds,
from steps [1] to [2]. Otherwise
the Time Search
mode will be cancelled.
• Press STOP button to exit the Time Search mode.
- 20 -
EN
6AI2
Advertisement
Table of Contents
