Sears LXI series 934.55156690 Owner's Manual page 25

Make sure ...
• If you did not set your desired digit within 2 seconds
after pressing CHANNEL • or • button during
steps [5] to [8], the input mode will forward to next
step.
• When you press SELECT button after pressing
CHANNEL • or • button during steps [5] to [8],
you may forward to next step.
• Press ADD/DELETE button to go back one step from
current step during steps [3] to [9].
5 Set the date when you
want to start
First, press CHANNEL • or •
button repeatedly until your de-
sired month appears. (Example:
"05" for May)
ONE ]qME PROGRAM
PROGRAM NUMI_It
.... •___oN
START TIME
END TIME - - : ....
CHANNEL - -
REC SPEED
Next, enter a date. (Example: "06" for 6th)
Set the start time
First, press CHANNEL • or •
button repeatedly until your de-
sired hour appears. (Example:
07)
Next, enter a minute. (Example:
3O)
ONE TIME PROGRAM
1
/
PROGRAM NUMBER 1
DATE 05 / 06_hi3lt
START TIME 07:3_PM
=1
END TIME ....
/-1%1
REC SPEED --
Then, press CHANNEL • or • button to point to AM
or PM. (Example: PM)
7 Set the end time
First, press CHANNEL • or •
button repeatedly until your de-
sired hour appears. (Example:
08)
Next, enter a minute. (Example:
30)
I ONE TIME PROGRAM
PROGRAM NUMBER _dp1
DATE 05/06 M
START TIME 07:30
Then, press CHANNEL • or • button to point to AM
or PM. (Example: PM)
8 Set the channel number
Press CHANNEL • or • button
repeatedly until your desired
channel number appears. (Exam-
ple: 16)
...... OG°AM
PROGRAM NUMBER 1
DATE 05/06
START TiME 07 : 30
END TIMB_OI_ _ 0
CHANNEL_ 16
REC SPEE_I%
9 Set the tape speed
Press CHANNEL • or • button
repeatedly until your desired
tape speed appears. (Example:
SP)
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE O5/06 MON
START TIME 07:30 PM
B ..... _:_o PM 1
CHANNEL
RECSPESO_ SP _ LP |
'_P AUTO
J
• "AUTO" is available only with Program No.1.
See "Just-In Time Recording" on page 28 for the use
of "AUTO" setting.
10
Exit the program mode
Press MENU button. Program 1 is now completed.
To set another program, repeat steps [1] to [10].
11
Set the timer
Press POWER/TIMER REC
button. The "@" indicator ap- 'g' _R,
pears on the display. The number 5:50
of all programmed events are
displayed with current time.
TO CORRECT AN A UTOMA TIC 1 IML R
PROGRAM
If you want to correct an automatic timer after you fin-
ished setting program,
1) Repeat steps [1] to [3] on previous page.
2) Select a digit you want to change using SELECT but-
ton or ADD/DELETE button.
3) Enter correct numbers using CHANNEL • or • but-
ton.
4) Press MENU button to return to original mode.
5) Press POWER button to return to timer stand-by mode.
TO STOP AN AUI'OMAIIC TIMER PRO-
GRAM WHICH HAS ALREADY STARTED
Press STOP/EJECT button on the VCR.
NOTE: STOP button on the remote control will not
function in the Automatic Timer Recording mode.
TO CANCEL OR CHECK THE
S TAR T/END TIME
1) Repeat steps [1] and [2] on previous page.
2) Select a program number you want to check using
CHANNEL • or • button. The details of selected
program appears on the TV screen.
You may cancel the entire program by pressing
ADD/DELETE button.
EN
-25- 6A12