Installation Instructions - GE PP989 Owner's Manual And Installation Instructions

Installation Instructions
UNPACKING YOUR COOKTOP
PARTS INCLUDED (PACKED BELOW THE COOKTOPI
, Blower assembly , (9) Sheet metal screws , Vent filter
, Blower plenum (8-18 x 3/8") , Cleaning cream
, (4) Nuts (10-32 keps - nuts with , Foam gasket tape (9 ft. roll) , Scrub sponge or scraper
lock washers attached) , Vent grille (on some models)
Check to be sure that all packing materials
and tape have been removed. This will include
tape on control knobs (if applicable), adhesive
tape, wire ties, cardboard and protective
plastic. Failure to remove these materials could
result in damage to the appliance once the
appliance has been turned on and surfaces
have heated.
Sheet Metal
Screws (9)(8-28
x s/8")
Cleaning Cream
Scrub Sponge
Vent Grille
Foam Gasket Tape
CAUTION:
DO NOT LIFT
FROM VENT
OPENING OR
BUMP GLASS
m
CAUTION:
GLASS IS FRAGILE DO NOT
BUMP EDGE OF GLASS DURING
INSTALLATION
Blower Assembly and (4) Mounting
Nuts (10-32 keps - nuts with lock
washers attached)
Blower Vent
Plenum Filter
12