GE PP989 Owner's Manual And Installation Instructions page 20

Installation Instructions
INSTALLING THE COOKTOP
[] INSTALLING THE COOKTOP
, CAUTION:
DO NOT LIFT
FROM VENT
OPENING.
Lift the cooktop by the gloss side edges as shown.
NOTE: Do not use the gloss top vent opening to lift
or move the cooktop into position.
Lower the cooktop into the countertop opening,
guiding it into position. Gloss is fragile-do not allow
it to drop onto the countertop. Support from the
underside and lower slowly.
Curefully remove your fingers one corner at o time
to lower the cooktop into position.
NOTE: Do not use Silicone RTV or caulk to bond
cooktop gloss to countertop.
| CHECKING FOR FLATNESS
Inspect the cooktop gloss for rocking or uneven
gap on oil four sides at the countertop surface.
Do not attempt to force the gloss to meet
the countertop.
INSTALLING THE OPTIONAL
INSTALLATION BRACKETS
NOTE: Check for glass flatness in Step 10 before
installing optional installation brackets.
Optional installation
bracket and
thumbscrew (not
included)
]
Cooktop
_ Countertop
Screws
supplied_ I
_---- Thumbscrew
with cooktop
To order optional installation brackets/thumbscrews,
call the National Parts Center at 800.626.2002.
Order two of each part: WB02X11331 Bracket
WB01X10353 Screw
To install optional installation brackets:
Remove 2 screws on both sides under cooktop.
Align optional installation bracket under cooktop
and reinstall screws through the slot in the bracket.
Do this on both sides of the cooktop.
Thread the thumbscrew through the hole
in the bracket and tighten to secure the cooktop
to the countertop. Repeat on the other side.
IMPORTANT: Turn thumbscrew until it touches
the bottom of the countertop. Do not overtighten.
20