Installation Instructions - GE JP256WM1WW Owner's Manual And Installation Instructions

Installation
Instructions
"If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com"
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Product failure due to improper installation is not
covered under the Warranty.
WARNING
properly grounded.
ATTENTION INSTALLER
•
COOKTOPS MUST BE HARD WIRED (DIRECT
WIRED) INTO AN APPROVED JUNCTION BOX. A
"PLUG AND RECEPTACLE" IS NOT PERMITTED
ON THESE PRODUCTS.
• Proper installation is the responsibility of the
installer and product failure due to improper
installation is NOT covered under warranty.
PARTS INCLUDED
Foam Tape
12
30 Electric Cooktop
JP256
Save these instructions
Observe all governing
This appliance must be
ALL
2 Hold-Down Brackets
6 Hex-Head Screws
(4 required, 2 extra)
2 Thumbscrews
MATERIALS YOU WILL NEED
Junction Box
TOOLS YOU WILL NEED
Pencil
Phillips-Head
Screwdriver
1/4 Nut Driver
Ruler or Straightedge
Safety Glasses
Wire Nuts
Saber Saw
1/8 Drill Bit & Electric
or Hand Drill