GE PP989 Owner's Manual And Installation Instructions page 22

Installation Instructions
INSTALLING THE COOKTOP
ATTACHING A BLOWER
TRANSITION DUCT
Use a blower transition duct for all downward
duct installations to connect to 6" round standard
ductwork. This 5½" x 10" rectangle to 6" round
transition duct is available at your local building
supply store.
(on other
side)
Remove the cardboard packing in the blower outlet.
Install the transition duct to the blower outlet. Secure
all joints with duct tape to assure an airtight seal.
[]_] CONNECTING
THE DUCTWORK
Connect the ductwork prepared in Steps 5 and 6 to
the blower transition duct.
BLOWER ELECTRICAL
CONNECTIONS
Loosen the two screws and remove and discard
the sheet metal strap covering the g-pin connector
on the cooktop bottom. Save the screws for
reinstallation later.
screws
and discord
strop
r_ BLOWER ELECTRICAL
CONNECTIONS {cont.}
, Connect the g-pin plug on the blower assembly to
the matching g-pin receptacle on the bottom of the
wire enclosure.
5-pin
connectors
Fold all wires into the electrical enclosure. Secure the
enclosure with the screws removed earlier, making
sure that no wires are trapped.
5-pin
connectors
-- Electrical
enclosure
Flexible
conduit
22