GE JGS905 Owner's Manual page 19

ge.com(U.S.)
vvww.GEAppliances.ca(Canada)
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
GC CC
II
How to Delay the Start of Cleaning
[] Touch the SELFCLEANLO/STD pad
on('e tk)I" a 4-hotli" clean tiille oi"
twice fin" a 3-hour clean time.
A 3-horn sell'clean time is
i'ecolilli/ended t()r/ise when
cleaning small, contained spills. A
self clean time of 4 hom_ or longer
is recommended fin" a dirtier oxen.
[_] Ira time other than 4 l/otu_ or
i¢-i
3 ho/u_ is needed, use tile number
pads and enter the desired clean
time.
Y(m can change tile clean time to any
tnne" between .3 houi_ and 5 houi_,
dei)ending, on how (li_t))our oxen is.
[]
Touch
tile DELAYSTART pad.
[] Using the number pads, enter the
time of (lax you want tile clean cycle
to start.
Tile door locl_s automatically: Tile display
will show tile start time. It will not be
possible to open tile oven door until
tile temperature drops below tile lock
temperature and tile
LOCKED
light
goes off.
When the LOCKEDlight goes off; you will
be able to open
tile doo_:
[] Touch
tile START pad.
After a Clean Cycle
You may notice some white ash in tile
oven. _&]pe it up with a damp cloth after
the
oven cools,
/f white spots rema/); remove them with a soap-
filled or plastic scounw pad and nnse thoroughly
with a wnegarand water mixture.
These deposits are usually a salt residue
that cannot be removed by tile clean
cycle.
If the oven is not clean after one clean
wcle, repeat the cycle.
iJi:: Y ou cannot set tile oven fin" cooking
tmtil tile oxen is cool enouoh for tile
door to tmlock.
_: While tile oven is sell:cleaning, you can
touch the CLOCKpad to display tile
time of day: To return to tile clean
countdown, touch tile
SELFCLEAN
LO/STD pad.
_ If tile rac]<s become hard to slide,
apply a small amount oI cooking oil to
a paper towel and wipe the edges of the
oven racl_s with the paper towel.
19