Control Panel; Floor - GE JGS968 Owner's Manual

ge.com(U.S.)
www.GEAppliances.ca ( Canada)
Stainless Steel Surfaces (onsomemodels)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel smti_ce,
use w;mn sudsy water or a stainless steel
cleaner or polish. Mwa)_s wipe the smti_ce
in the direction of the grain. Follow the
cleaner instructions fiw cleaning the
stainless steel surfi_ce.
To inquire about i_urchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer or Mabe
Parts Store nearest you, please call our
toll-free number:
NationalPartsCenter 1.800.626.2002 (U.S.)
1.800.661.1616 (Canada)
ge.com(U.S.)
www.GEAppliances.ca (Canada)
Painted Surfaces
Painted surfi_ces include the top and
sides _ff the (loo_; and the drawer fl'ont.
Clean these _fl_ soap and water or
a \'inegar and water solution,
Do not tlse COillillei'cial o_,en cleaneis,
cleanino_ powde_, steel wool or hm_h
abrasixes on any painted surti_ce.
Centerverlt @
Oven Vent
The oven is vented through an opening
in the cooktop under the gillie.
Ne\'er cover the opening with ahmfinum
foil or any other material. This would
prevent the oxen xent from working
properly.
Control Panel
If desired, t he touch
pads may be turned off
before
cleaning.
See the ControlLockoutsection.
Clean up splatte_ with a damp cloth.
_i_)tl II/_ly
also rise a glass cleaner
Remove heavier soil with warn/soap)'
_te_: Do not use abrasives of any kind.
Turn on the touchpads after cleanbg.
Oven floor
Removable OvenFloor
To remove the oven floor for easier
cleaning:
[] Remoxe the oxen door using the
instructions in the
Lift-Off Oven Door
section.
[] (;rasp oxen floor at the rear finger
slots on each side, lift it up, push it
back and pull it Otlt.
V_ Clean the oven floor with warn/
soapy wateI:
IMPORTANT'.Mwa)s replace the
remox d)le floor befi)re the next use.
35