GE JGS968 Owner's Manual page 26

Usingthe self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
OD(DCD@(D
(DODCD(33
OD C <D(Z)CD
(DOD(Z)(?ZS)
How to Delay the Start of Cleaning
[] Touch the SELFCLEANLO/STD pad
once fi/r a 4-hour clean tiine or
twice fi)r a 3-hour clean tiine.
A 3-hour self_'lean tiine is
i'eCOllli//ended l()r rise when
cleaning sinall, contained spills. A
self=clean fin/e at 4 houi_ or longer
is reconnnended fl)r a dirtier ()veil.
[_] lfa tiIne other than 4 houI_ or
3 houI_ is needed, use the nunlber
pads and enter the desiied clean
tinle.
You can change the clean tiine to any
tiine between 3 houi_ and 5 houi_,
del)ending oil how dirty your ()veil is.
[] Touch tile DELAYSTART pad.
[] Using tile nunlber pads, enter tile
tiIne of (lax you want tile clean c_cle
to start.
Tile door locks auton/atically: Tile display
will show the start tin/e. It will not be
possible to open tile ()veil door until
tile ten/i)erature drops below tile lock
teini)erature
and tile LOCKEDlight
goes off.
_4]/eIl tile tOCgEOlight goes off; you will
be able to open tile door.
[] Touch tile START pad.
After a Clean Cycle
Y)u nlav notice soine white ash in tile
oven. Wipe it up with a daInp cloth alter
tile ()veil cools.
If white spots remain, remove them with a soap-
filled or plastic scounhgpad and rinse thoroughly
with a wnegarand water mixture.
These deposits are usually a salt residue
that cannot be ren/oved by tile clean
cycle.
If the oven is not clean after one clean
wcle, repeat the cvcle.
iJi:: _ )u cannot set tile oven fin" cooking
until tile oxen is cool enough fin" tile
dooI" to tlnlock.
_: X4]file tile ()veil is sel6cleaning, you can
touch tile CLOCKpad to display tile
tiIne of day. To return to tile clean
countdown, touch tile SELFCLEAN
LO/STD pad.
_: If tile racks becon/e hard to slide,
apply a sn/all anlount of cooking oil to
a paper towel and wipe tile edges of tile
oven racks with tile paper towel.
26