Troubleshooting Tips - GE JRP28 Owner's Manual

Beforeyou call forservice...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Possible Causes What To Do
Controlsignals after You forgot to enter a * Touch tile BAKEpad and desired temper:lture or tile
entering cooking time bake temperature or SELF CLEAN pad and desired clean time.
or delay start clea_fing thne.
Food does not bake Oven controls improperly set. * See tile Using the oven section.
or roast properly
Shelf position is incorrect * See tile Using the oven section.
or the shelf is not level.
Incorrect cookware or * See the Using the oven section.
cookware of hnproper
size being used.
Oven thermostat * See the Adjust the oven thermostat--Do it yourself!
needs adj ustinent, sectiou.
Food does not Door not open to the • See the Using the oven section.
broilproperly broil stop position as
recommended.
Oven controls improperly set.
• Make sure you touch the BROIL HI/LO pad.
Improper shelf • See the Broiling Guide.
position being used.
Food being cooked
• For best results, use a pau designed
fin" broiling.
ha a hot pan. Make sure it is cool.
Cookware not stilted • For best results, use a pan designed fin" broiling.
for broiling.
ha some areas the power • Preheat the broil eleIHeut for 10 miut/tes.
(voltage) may be low.
• Broil
fin" the hmgest period of time recommended in
the Broiling Guide.
Clockand timer A fuse ha your home • Replace the fl/se or reset the tit(tilt breaker:
do not work may be blown or the
circuit breaker tripped.
Oven controls hnproperly set.
• See the Using the clock and timer section.
Oven light does Lightbulb is loose or defective. • Tighten or replace the btflb.
not work
Pad operating light is broken.
• Call fin" service.
22