Clock And Timer - GE JRP28 Owner's Manual

Usingthe clock and timer.
Not all features are on all models.
Make sure the clock is set to flTe
correct time of day.
To Set the Clock
Tile clock must be set to tile correct time
of day fin" tile autonmtic oven tinting
timcfions to work properly: Tile time of
day cannot be changed durhlg a delayed
cooking or a delayed self-cleaning cycle.
[] Touch tile
TIMER/CLOCK
pad twice.
[] Touch tile ÷ or-pad.
If tile + or - pad is not touched
within one minute after )ou touch tile
TIMER/CLOCK pad, tile display rexerts to
tile original .settin ,_ If this happens, touch
tile TIMER/CLOCKpad t\dce
and reenter
tile time of day.
[] Touch tile START pad until tile time
of day shows in tile display: This
ente_ tile time and starts tile clock.
Tocheckthetimeof daywhenthedisp&yis
showl))g otherinformation, simplytouchthe
TIMER/CLOCK p ad Thetime ofdayshowsuntil
another p adis touched
To Turn Off the Clock Display
If you have several clocks in yet:u" kitchen,
you may wish to turn off tile dine of day
clock display on your oven.
[] Touch tile
TIMER/CLOCKpad
once
tO ttlI'n off tile time of
day display.
Mthough you will not be able to
see it, tile clock maintains tile correct
time of din.
[] Touch
tile TIMER/CLOCKpad twice to
recall tile clock display:
The timer is a minute timer only.
The CIEAR/OFFpad does not affect
the time_
To Set the Timer
The tlYner d oes not control ovenoperations.
ThemaxlYnum semng on the timer is 9 hours
and 59 minutes.
[]
[]
Touch tile TIMER/CLOCKpad.
Touch tile + or-pad until tile
_lIllO/lnt Ol_ tiIlle FOil W_lIlt shows in
tile display. Tile maximum time that
can be entered in minutes is 59.
Times more than 59 minutes should
be changed to hom_ and minutes.
If youmakea mistake,touchthe TIMER/CLOCK
padandbeg1)) agalk
[]
Touch
tile STARTpad. Tile time
will staxt counting down, althouoh
tile displa) does not ch'ln,,e, _ tmtil
one minute has passed.
[] X4q/en tile timer reaches :00, tile
control will beep 3 times tollowed
by
one beep exer_ 6 seconds tmfil tile
TIMER/CLOCKpad is touched.
To Reset the Timer
If tile display is still showing tile time
remaining, you may change it by touching
tile
TIMER/CLOCKpad,
then touching tile
+ or -pad until tile time um want
appea_ in tile display:
If tile remaining time is not in tile display
(clock, start time or cooking time are in
tile display), recall tile remaining time by
touching
tile TIMER/CLOCKpad and then
touching tile + or -pad to enter tile new
[iII/e vo/i w_l nt.
To Cancel the Timer
Touch tile TIMER/CLOCKpad twice.
8