GE JRP28 Owner's Manual page 17

ge.com
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
@
@
How to Delay the Start of Cleaning
[] Touch the SELFCLEAN pad.
[] Using the 4- or - pad, enter the
desired clean time.
[]
Touch the
DELAYSTART
pad.
[] Using the 4- or - pad, enter the dine
of (ID_ VOtl want
the clean cycle to
start.
[] Touch the
START
pad.
The door locks automatically: The display
will show the start time. It will not be
possible to open the oven door tmfil
the temperature drops below the lock
temperature and the LOCKED light
goes off.
_4]_en the LOCKED light is off, open
the dooI;
After a Clean Cycle
You may notice some white ash in the
oven. _,_]i)e it up with a damp cloth after
the (wen cools.
If whitespotsremain, r emove themwith a
soap-filled scounng padandnnsethoroughly w ith
a wnegarand watermixture.
These deposits are usually a salt
residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
!i_:Ym cannot set the oven fin" cooking
tmtil the oxen is cool enough fin" the
door to tlnlock,
!i_:If the shelxes become hard to
slide, wipe the shelf supports with
cooking oil.
/7