GE Appliances P2B930 Owner's Manual And Installation Instructions page 23

!iii i i ii I i!i ii iiii i i
GEAppliances.com
Gas/Control Lockout (on some models)
Your control will allow you to lock out the
surface burners, oven burners and control
panel so they cannot be activated.
To lock/unlock the controls:
@
Turn all surface burners off.
Touch and hold the GAS/CONTROL
LOCKOUTpad for 3 seconds until the
display shows LOC
To unlock the control, touch and hold the
GAS/CONTROL LOCKOUTpad for
3 seconds until LOCdisappears from the
display.
When this feature is on and the touch pads are
touched, the control will beep and the display
will show LOC
The control lock-out mode affects all
controls. No controls will work when this
feature is activated.
The adjustment will be retained in memory
offer o power failure.
HJ/Lo
12-Hour, 24-Hour or Clock Blackout
Your control is set to use u 12-hour clock.
If you would prefer to have u 24-hour military
time clock or black out the clock display,follow
the steps below.
BE Touch the Bake and Broil Hi/Lo pads at
the same time for 3 seconds until the
display shows SF.
Touch the Clock pad once. The display will
show 12 hr. If this is the choice you wont,
touch the Start pad.
Touch the Clock pod again to change to the
24-hour military time clock. The display will
show 2/4hr. If this isthe choice you wont,
touch the Start pod.
Touch the Clock pad again to black out the
clock display.The display will show OFF. If this
is the choice you want, touch the Start pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
HI/Lo
oo ,.o 1,,,,
i
Cook and Hold
Your new control has a cook and hold feature
that keeps cooked foods warm for up to 3
hours after the cooking function isfinished.
This feature can only be used when timed
cooking.
To activate this feature, follow the steps below.
BE Touch the Bake and Broil Hi/Lo pads at
the same time for 3 seconds until the
display shows SF.
Touch the Cooking Time pad. The display
will show Hid OFF.
@
Touch the Cooking Time pad again to
activate the feature. The display will show
Hid ON.
Touch the Start pad to activate the cook
and hold feature and leave the control set
in this special features mode.
HI / Lo
c,oo
Tone Volume
(on some models)
Thisfeature allows you to adjust the tone
volumes to a more acceptable volume. There
are three possible volume levels.
BE Touch the upper oven Broil Hi/Lo and
Bake pads at the same time until the
display shows SF.
Touch the Cook Time pad.The display
shows 2 Beep This is the middle volume
level.
Touch the Cook Time pad again. The
display will show 3 Beep.This is the loudest
volume level.
Touch the Cook Time pad again. The
display will show/. Beep.This is the quietest
volume level.
[] Choose the desired sound level (1 Beep,2
Beep, 3 Beep).
[7] Touch the Start pod. 23