GE Appliances P2B930 Owner's Manual And Installation Instructions page 16

Self-cleaning dual fuel convection ranges
Table of Contents

Advertisement

Available languages

Available languages

Using the probe, con s ome mode sI
[ACAUTION ]
:o prevent burns, do not unplug the probe from the oven outlet until the oven has cooled. Do not
store the probe in the oven.
If your model has a door latch, do not lock the oven door with the latch while cooking with the probe. The latch is used
for self-cleaning only.
For many foods, especially roasts and poultry, internal food temperature
is the best test for doneness. The temperature
probe takes the guesswork out of cooking foods to the exact doneness you want.
The temperature probe has a
skewer-like probe at one end and
a plug at the other end that goes
into the outlet in the oven.
Use of probes other than the one provided with
this product may result in damage to the probe.
Use the handles of the probe and plug when
inserting and removing them from the food and
outlet.
To avoid damaging your probe, do not use
tongs to pull on the cable when removing it.
To avoid breaking the probe, make sure food
iscompletely defrosted before inserting.
To prevent possibleburns,do not unplugthe
probefrom the outlet untilthe ovenhas cooled.
Never leave your probe inside the oven
during a self-cleaning cycle.
Do not store the probe in the oven.
{:i ¸{{;: i
¸¸fi{{
{ {{ii:i
ii:i ii:i
i _ ii
After preparing the meat and placing it on
a trivet or on a broiler pan grid, follow these
directions for proper probe placement.
Insert the probe completely into the meat. It
should not touch the bone, fat or gristle.
For roasts with no bone, insert the probe into
the meatiest part of the roast. For bone-in ham
or lamb, insert the probe into the center of the
lowest large muscle.
Insert the probe into the center of dishes such
as meat loaf or casseroles,
Insert the probe into the meatiest part of the
inner thigh from below and parallel to the leg
of a whole turkey.
16
DDD[]D
DDD L
DDDD[]
DDD L
How to Set the Upper
Oven For Cooking
When
Using
the Probe
rl1
insert the probe into the food.
[]
Plugthe probe into the outlet in the oven.
Make sure it's pushed all the way in.Close
the oven door.
[-_
Touch the Probe pad.
[]
Touch the number pads to set the desired
internal food or meat temperature
between !00°F and 200°F.
rs] Touch the Bake pad.
[]
Touch the number pads to set the desired
oven temperature.
rT] Touch the Start pad.
The display will flash if the probe is inserted
into the outlet and you have not set a probe
temperature and touched the Start pad.
%
When the internal temperature of the food
reaches the number you have set,the
probe and the oven turn off and the oven
control signals.To stop the signal, touch
the Clear/Offpad. Use hot pads to remove
the probe from the food. Do not usetongs
to pull on it-they might damage it.
To change the oven temperature during probe
cooking, touch the Bake pad and then the
number pads to set the new temperature.
If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the probe
is removed from the oven.
You can use the timer even though you
cannot use timed oven operations while
using the probe.
The display will show LO until the internal
temperature of the food reaches 100°F;then
the changing internal temperature will be
shown.

Advertisement

Table of Contents
loading

This manual is also suitable for:

C2s985

Table of Contents