GE monogram ZDP304LP6SS Owner's Manual page 18

30", 36" and 48" professional dual fuel ranges
Table of Contents

Advertisement

Available languages

Available languages

Oven Rocks
Professional
Dual Fuel Range
Full
extension
oven racks
A CAUTION: To o oid
possible
burns, place the racks in the correct position
before turning on the oven.
The correct rack position depends on the
kind of food and the browning desired.
The racks have a frame that locks into the
rack supports on both sides. Once the frame is
locked into place, always pull the rack out, by its
upper front rail, to its full extension stop position,
when placing or removing cookware.
Remove
and
replace
oven racks
To remove a rack:
1. Make sure the rack is pushed all the way into
the oven.
2. Grasp the rack by both its upper front rail and
its lower front rail and lift straight up to unlock
the front rack locks from the rack supports.
Lift to unlock front
rock locks from the
rock support
To replace a rack:
i. Place the rear rack locks over and onto the
rack supports (five rack positions are available
including the top position).
Lower
"_
rail
Front rock lock
3. Firmly holding onto both the upper and lower
front rack rails, pull the rock forward and
remove it from the oven.
2. Slide the rack all the way in until the rear rack
locks are secure on the rear rack supports and
press the front rack locks onto the front rack
supports.
Slide the rock oil the way in
end push down to lock the
front rock locks onto the
front rock supports
Front
rock
lock
3. Pull the rack all the way out to check that it is
properly engaged.
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents