Setting The Time/Date Manually; Temperature Measuring Units (ºf/ºc); Air Pressure Measuring Units (Inhg/Hpa) - La Crosse Technology WS-8035U-IT Instruction Manual

4. The year will begin to flash to the right of the Moon Phase display.
5. Press and release the "OUT/+" button to select the desired year.
6. Press and release the "SET" button to confirm the year and
continue to the Month setting.
J. Setting The Month Manually
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button eight more times to advance to
the Manual Month setting.
4. The Month will begin to flash to the right of the Moon Phase
display.
5. Press and release the "OUT/+" button to select the desired month.
6. Press and release the "SET" button to confirm the month and
continue to the Date setting.
K. Setting The Date Manually
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button nine more times to advance to
the Manual Date setting.
4. The date will begin to flash to the right of the Moon Phase display.
5. Press and release the "OUT/+" button to select the desired date.
6. Press and release the "SET" button to confirm the date and
continue to the Temperature Measuring Units setting.
L. Temperature Measuring Units Selection (°F or °C)
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button ten more times to advance to
the Temperature Measuring Units setting.
4. °F or °C will flash at the top of the display.
5. Press and release the "OUT/+" button to select the desired
temperature measuring unit.
6. Press and release the "SET" button to confirm the temperature
measuring unit and continue to the Air Pressure Measuring Units
setting.
M. Air Pressure Measuring Units Selection (inHg/hPa)
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
11