Setting The Time/Date Manually - La Crosse Technology WS-7394U-IT Instruction Manual

Note: In 12h mode "PM" will appear to the left of the time during PM
hours. If the time is not within the PM hours nothing will be displayed.
Be sure to set the time to the correct AM/PM time to ensure automatic
reception.
6. Press and release the "SET" button to confirm the 12/24-hour time
mode setting and continue to the Hour setting.
G. Setting The Hour Manually
The WWVB signal will override any manual set time and date
information. The time will be based on the time zone selected.
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button five more times to advance to
the Manual Hour setting.
4. The hour will begin to flash at the top of the display.
5. Press and release the "OUT/+" button to select the desired hour.
6. Press and release the "SET" button to confirm the hour setting and
continue to the Minute setting.
H. Setting The Minutes Manually
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button six more times to advance to
the Manual Minutes setting.
4. The minutes will begin to flash at the top of the display.
5. Press and release the "OUT/+" button to select the desired minutes.
6. Press and release the "SET" button to confirm the minutes and
continue to the Year setting.
I. Setting The Year Manually
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
GB
P.12
3. Press and release the "SET" button seven more times to advance
to the Manual Year setting.
4. The year will begin to flash below the time display.
5. Press and release the "OUT/+" button to select the desired year.
6. Press and release the "SET" button to confirm the year and con-
tinue to the Month setting.
J. Setting The Month Manually
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button eight more times to advance to
the Manual Month setting.
4. The Month will begin to flash below the time display.
5. Press and release the "OUT/+" button to select the desired month.
6. Press and release the "SET" button to confirm the month and con-
tinue to the Date setting.
K. Setting The Date Manually
1. Press and hold the "SET" button for five seconds.
2. "lcd" will appear at the top of the display and a number will flash
next to it.
3. Press and release the "SET" button nine more times to advance to
the Manual Date setting.
4. The date will begin to flash below the time display.
5. Press and release the "OUT/+" button to select the desired date.
6. Press and release the "SET" button to confirm the date and con-
tinue to the Temperature Measuring Units setting.
GB
P.13