Table of Contents
Advertisement
2.
Press and release the + key to select DST ON or OFF.
3.
Press and release the SET key to confirm the DST setting and continue to the Radio-controlled
time setting.
Note: The DST default is "ON", meaning that the WWVB will automatically change the time
according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST
changes (Arizona and parts of Indiana) turn the DST "OFF".
RADIO-CONTROLLED TIME SETTING
1.
The word ON will start flashing in the lower LCD display.
2.
Press and release the + key to select radio-controlled time ON or OFF.
3.
Press and release the SET key to confirm the radio-controlled time setting and continue to the
Language setting.
Note: Turn off the radio-controlled time feature only if you DO NOT want the clock to automatically
update itself.
LANGUAGE SETTING
The weekdays can be displayed in LCD2 with the pre-set languages: US English (ENG), French
(FRA) and Spanish (ESP).
1.
LAN will be displayed in the lower LCD along with one of the three letter language
abbreviations.
2.
Press and release the + key to select the desired language.
3.
Press and release the SET key to confirm the language setting and enter the Manual Time
setting mode.
MANUAL TIME SETTING
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance,
etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
1.
The hour digits will start flashing in the upper LCD.
2.
Select the desired hours by pressing and releasing the + key.
3.
Press and release the SET key to advance to the minutes setting.
4.
Now the minute digits will start flashing.
5.
Select the desired minutes by pressing and releasing the + key. If the + key is held, the units
will increase by 5.
6.
Press and release the SET key to confirm the Time setting and continue to the Year setting.
Note:
The unit will still try to receive the signal every day despite it being manually set. When it does
receive the signal, it will change the manually set time into the received time. During reception
attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB tower
icon will not appear but reception will still be attempted the following hour.
Hide quick links:
Advertisement
Table of Contents
